Compare Accu rate Air VU2 2-Corner Solenoid Valve Suspension Bare 3/8NPT
NPT 1/4" VU4 4-Corner Solenoid Valve Unit Air Suspension Manifold is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previousÂ
manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.
Air Compressors AirMaxxx 480C Chrome 3/8" Valves Air Bag Management Blk 7 Switch
| Compatiable Suspension Type | 4-Corner Full Air Suspension |
| Voltage Requirements |  10.5-16 Volts |
| Current Requirements | 1.1 Amps (for each of the (8) Valves) |
| Connectors | Â IP67 certified (immersion up to 3 ft) |
| Fitting Size | 3/8" D.O.T. / P.T.C (x 8), 1/2" NPT (x 4) |
| No. of Inlet Ports | 2 |
| No. of Exhaust Ports | 2 |
| Max Operating Pressure | 200Psi |
1. wiring harness for easy installation
2. 3/8" press-fit D.O.T Fittings eliminate pipe threads for 100% leak free operation
3. High Pressure Rated for operation up to 200psi
4. Anodized Aluminum Manifold to prevent corrosion
5. 100% weather resistant for harsh under vehicle environments
6. For use with any brand of controller or switches
Â
Â
Compare Accu rate Air VU2 2-Corner Solenoid Valve Suspension Bare 3/8NPT
NPT 1/4" VU4 4-Corner Solenoid Valve Unit Air Suspension Manifold is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previousÂ
manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.
Air Compressors AirMaxxx 480C Chrome 3/8" Valves Air Bag Management Blk 7 Switch
| Compatiable Suspension Type | 4-Corner Full Air Suspension |
| Voltage Requirements |  10.5-16 Volts |
| Current Requirements | 1.1 Amps (for each of the (8) Valves) |
| Connectors | Â IP67 certified (immersion up to 3 ft) |
| Fitting Size | 3/8" D.O.T. / P.T.C (x 8), 1/2" NPT (x 4) |
| No. of Inlet Ports | 2 |
| No. of Exhaust Ports | 2 |
| Max Operating Pressure | 200Psi |
1. wiring harness for easy installation
2. 3/8" press-fit D.O.T Fittings eliminate pipe threads for 100% leak free operation
3. High Pressure Rated for operation up to 200psi
4. Anodized Aluminum Manifold to prevent corrosion
5. 100% weather resistant for harsh under vehicle environments
6. For use with any brand of controller or switches
Â
Â
single shaft shredder is suitable for recycling wide range of materials. used in Plastic Recycling Machine industry. It is an ideal machine for plastic, paper, fiber, rubber, organic waste and a wide variety of materials. As per our customers` requirements, such as the input size of the material, capacity and the final output size etc, we could work out a suitable proposal for our clients. After being shredded by the machine, the output material could be used directly or go into the next step of size reduction. With the function of Siemens,microcomputer control system, it is possible to control automatically start, stop, automatic reverse sensors to protect the machine against over loading and jamming.
Single Shaft Shredder,Single Shaft Shredder Machine,Single Shaft Plastic Shredder,Single Shaft Shredder Traduction
zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com