I have encountered several different roads in Australia and I will come here one by one.
(1) Motorway or Highway M, which is the highest-level road, similar to our highway, most of which are free of charge. Only Sydney, Melbourne and Brisbane have a small number of toll roads, of which the toll roads are mainly in Sydney. The toll gate is divided into cash Cash, E-tag and E-pass. The cash is also divided into two types: changeable and non-existent. There are no electronic payment devices for the rented vehicles. Therefore, it is necessary to advance the line to the cash. mouth. In addition, please pay special attention to Melbourne's citylink and Sydney's Lane Cove Tunnel to North Sydney, M7, Cross City Tunnel, Harbour Tunnel and Facon Street exit. If you want to take these routes without installing the E-tag, you can call the day pass one day in advance or in the next three days. The phone number is not the same for different routes. Ask questions when renting a car. You can also commission a car rental company to buy a good day pass.
(2) freeway, This refers to highways without traffic lights, a slightly lower level than motorway, and the condition of the road surface is very good, basically similar to our highway. Although there is no traffic light, there will be intersections. There will be a reminder sign a long distance ahead of time, and a little attention will be paid.
(3)highway, similar to our provincial highway, with traffic lights, usually 2 lanes.
(4) The roads at the beginning of A, B, and C feel one level lower than our provincial highway, usually just one lane, and there will be a 300-meter-long overtaking lane every few kilometers. There are few gas stations along the roads (1) and (4), which are usually separated by tens of kilometers. There are many roads (2) and (3), especially when passing through towns, the gas stations are more concentrated. A certain number of Australian roads may consist of many roads with different road names, so you should pay more attention to the road number, not the specific road name.
Tungsten Carbide Planer Knives
Our blade part is brazed tungsten carbide, the finished blade part size can ensure 10x1mm, The material is high hardness (HRA88~90) and virginal fine particles of tungsten carbide. Our factory accumulate rich experince for welding, the finished product is seamless, without overflowing, relieving of internal stress, then processed with precise grinding machine. They are good working for a variety of hard woods. With the features of good red hardness, less than 400mm length Wood Planer Knives edge straightness error < 0.05mm. Besides, they are strong resistance to abrasion, sharp blade, smooth planed surface, no distortion and no crack.
Tungsten Carbide Planer Knives,Tungsten Carbide Planer Blades,Tungsten Planer Blades,Tungsten Carbide Planer Knife
SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.telostool.com