- Model NO.: QL4250W2NCZ
- Power: Diesel
- Emission Standard: Euro 5
- Seats: ≤5
- Engine Capacity: 15.681 L
- Tire Design: Tubeless
- Pulling Capacity: 60-80 Ton
- Brand: Isuzu Truck
- Trademark: ISUZU
- Specification: EMARK, GCC, VCA
- HS Code: 8701200000
- Transmission Type: Manual
- Load Capacity: 21-30t
- Drive Wheel: 6×4
- Horsepower: ＞450hp
- Tire Certification: ECE, GCC, ISO
- Condition: New
- Engine: Isuzu 6wg1-Tcg51
- Engine Horsepower: 380,420,460
- Transport Package: Nude
- Origin: China
 KEY PARAMETER AND SPECIFICATION FOR ISUZU TRUCK
Â
| Model | QL4250W2NCZ Driving type: 6*4 left hand driving | ||
| Engine | Make:Â ISUZU | Â | |
| Diesel 4-stroke direct injection diesel engine, electronic control common rail,SCR |  | ||
| Engine model:6WG1-TCG51, Euro V emission standard |  | ||
| 6-cylinder in-line with water cooled, turbo-charging and intercooler |  | ||
| Maximum output: 460 hp (338 Kw) |  | ||
| Maximum torque: 2300 Nm |  | ||
| Displacement:Â 15.681Â L | Â | ||
| Transmission | ZF ECOSOLIT, 16 forwards and 2 reverse,mannual |  | |
| Front Axle | 7 Ton Loading Capacity | ||
| Rear Axle | 18 Tons Loading Capacity each unit,Speed Ratio 3.07-5.571   |  | |
| Fifth Wheel | 2 inch, Rated loading capacity at fifth wheel: 50,000kg | ||
| Chassis | Frame: U-profile parallel ladder frame, and reinforced subframe 320×90×8 all cold riveted cross members | ||
| Front suspension: 7 semi-elliptic leaf springs | |||
| Rear suspension:10 semi-elliptic leaf springs | |||
| Aluminium fuel tank: 600 L capacity with locking fuel cap, fitted to the off side of the chassis |  | ||
| Wheels & Tyres | Tire:315/80R22.5,Aluminum rim | ||
| Driver's Cab | ISUZU VC61 high roof cab, 2 seats+2 bed |  | |
| Dimensions  mm | Wheel base | 3385+1370 MM | |
| Overall length | 6895 MM | ||
| Overall width | 2540 MM | ||
| Overall height | 3970 MM | ||
| Weight  kg | Dead weight | 8870 KG | |
| Rated Pulling Capacity | 39500 KG | ||
| Gross vehicle weight(GVW) | 25000 KG | ||
| Front axle loading capacity | 7000 KG | ||
| Rear axle loading capacity | 18000*2 KG | ||
Â
As one of the leading die casting manufacturers with over 10 years of experience, Zheke Mould Company has been offering superior die casting parts for LED lighting manufacturing and other indudustries. With our professional technicians and cutting-edge die casting process, every piece of our parts comes out with reliable quality and cost effectiveness.
Our die casting services for LED Light Aluminum Die Casting Parts include the use of aluminum alloys. A key advantage of using aluminum in the die casting process is its low cost - aluminum parts are much less expensive than parts produced by other manufacturing processes. From a functionality perspective, aluminum die cast parts typically weigh one-third less than steel parts, while still offering the strength and durability that is essential for any lighting fixture.
Benefits of Aluminum Die Casting for LED Light Aluminum Die Casting Parts include:
- The ability to configure parts into various shapes and sizes.
- The ability to incorporate features such as stand offs for assembly, side holes, flatness as required without secondary operations.
- Excellent electrical conductivity
- Superior thermal properties, making it suitable for use in high-temperature lighting applications.
- The ability to easily be powder coated for enhanced aesthetic appeal.
- Customization to accommodate the needs of low- and high-volume manufacturing operations.
Our capabilities encompass precise high-pressure die casting for a wide range of lighting parts including:
- LED Heat Sink
- Stage Lamp Heat Sink
- LED Housing
- LED Household Heat Sink
- Automobile Headlights Heat Sink
We're a Full-Service Lighting Parts Manufacturer.
LED Light Aluminum Die Casting Parts
LED Light Aluminum Die Casting Parts,Light Aluminum Die Casting Parts,Household Appliance Aluminum Die Casting Parts
Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com