Correct use of brakes
The brake system is often supplemented with lubricating oil, which is well known to the majority of vehicle owners. On the other hand, for the brake fluid, many vehicle owners often buy new vehicles until the vehicles are damaged and have not been replaced. What is the effect of this approach? ?
Brake fluid is commonly referred to as brake oil and is used to transmit the brake power of the owner to the vehicle brake. If the brake oil is dirty (because the brake fluid moves back and forth in the brake pipe, the metal powder of the brake master cylinder and the cylinder pump will seep into the brake fluid, and after a while, it will produce impurities such as sludge), and the viscosity will increase. Will directly affect the braking force of the vehicle, the specific performance for the owner feel brake "soft", so the owner for every 2 to 40,000 kilometers, you must replace the brake oil.
Do not ignore uneven wear of brake pads
Part of the braking system that needs regular attention is the consumable brake pad in addition to the brake fluid. When the vehicle is running, the sand on the road is often involved in the brake system, high-speed impact brake pads, causing uneven wear of the brake pads. The specific performance is that if it happens in the front wheel, the vehicle will shake when the driver brakes; if it is the rear wheel, when the vehicle owner brakes, he feels that the braking power is insufficient and the system is unresponsive. Therefore, the owner should regularly check the degree of wear of the brake pads, whether the thickness meets the safety standards and whether the surface is uniform.
Get rid of bad driving habits
Finally, the daily bad driving habits of owners, especially some new owners, will accelerate the loss of the braking system. For example, after the brake, the foot is still placed on the brake pedal instead of pulling the handbrake. At this time, the brake master cylinder is in a high pressure state for a long time, and wear between the cylinder pump and the piston of the master cylinder is increased, resulting in leakage. Pressure, which affects the braking function of the vehicle.
Round steel refers to a solid long strip of steel with a circular cross-section. Round steel is divided into three types: hot rolled, forged and cold drawn. The size of hot rolled round bar is 5.5-250 mm. Among them: small round bars of 5.5-25 mm are mostly supplied in bundles of straight strips, which are often used as steel bars, bolts and various mechanical parts; round bars larger than 25 mm are mainly used for the manufacture of mechanical parts and billets of seamless steel pipes Wait.
Round Steel Bar,Stainless Steel Round Bar,Round Bars,Mild Steel Round Bar
Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.sdrizhaoxinsteel.com