Cpm Electric Start Water Pump

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. They are extremely reliable, simple to use, quite and virtually maintenance-free, finding many uses in domestic and civil applications, and in particular the automatic distribution of water from small and medium-sized surge tanks, transferring water, watering gardens, etc.

Cast iron pump body
Stainless steel mechanical seal(graphite to ceramic)
Brass impeller
Protection IP44
Anti-rust shaft(Hi-Cr plated 45# steel shaft)
With thermal overload protector in single phase motor
C&U bearing or local bearing
AUTOCPM

Application :
CPM series are single stage centrifugal pumps, suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluide. The hydraulic characteristic is with higher head and smaller capacity.
 
Operating conditions:
Liquid temperature up to 60
Ambient temper up to 40
Total suction lift to 9m
Continuous duty

Construct:
Pump body: Cast Iron 
Impeller: Brass    
Mechanical seal: Stainless steel/Carbon-ceramic   
Motor: Closed, externally ventilated
Insulation class: B and F    
Protection class: IP44 or IP54  
Shaft: 45# Steel / Stainless steel   
Thermal protector (if required) 
 
Technical data(220-240V/50HZ)
These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. They are extremely reliable, simple to use, quite and virtually maintenance-free, finding many uses in domestic and civil applications, and in particular the automatic distribution of water from small and medium-sized surge tanks, transferring water, watering gardens, etc.

Cast iron pump body
Stainless steel mechanical seal(graphite to ceramic)
Brass impeller
Protection IP44
Anti-rust shaft(Hi-Cr plated 45# steel shaft)
With thermal overload protector in single phase motor
C&U bearing or local bearing
AUTOCPM

Application :
CPM series are single stage centrifugal pumps, suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluide. The hydraulic characteristic is with higher head and smaller capacity.
 
Operating conditions:
Liquid temperature up to 60
Ambient temper up to 40
Total suction lift to 9m
Continuous duty

Construct:
Pump body: Cast Iron 
Impeller: Brass    
Mechanical seal: Stainless steel/Carbon-ceramic   
Motor: Closed, externally ventilated
Insulation class: B and F    
Protection class: IP44 or IP54  
Shaft: 45# Steel / Stainless steel   
Thermal protector (if required) 
 
Technical data(220-240V/50HZ)

Non-woven Punching Machine

The non-woven perforated needle roller developed and designed by the company adopts imported alloy steel wire needles with high strength and good abrasion resistance. The processing accuracy has reached the same level in the world, and the air permeability detection is uniform and stable.
This series of needle rollers are widely used in various types of non-woven fabric punching, non-woven fabric embossing, etc. There are cold punch needle rollers for direct punching and heated punch needle rollers. The base material of the cold punching pin roller adopts copper alloy. Heat-resistant copper is used as the base material of the heating needle roller.
Our company specializes in the supply of non-woven perforated needle rollers, non-woven perforated needle rollers, and wholesale of non-woven perforated needle rollers. The product quality and processing technology reliability and stability are at the domestic advanced level. According to customer requirements Produce a variety of special specifications of needle rollers and needle ring products.

Professional design of various mouth-shaped needle rollers and punching molds, the products produced are particularly good in three-dimensional impression, uniform mouth shape, and good flexibility. Advanced equipment and years of development experience, CNC processing methods, upper and lower concave and convex needle rollers (heatable). High precision, uniform hole spacing, uniform size and shape. A full set of machining equipment and advanced CNC equipment, so we control the entire production process by ourselves. We are the best partner to help you improve the quality of your products. Professional CNC large-scale roller engraving machine, the maximum processing diameter is: 300 mm, the length is: 1.5 meters, processing all kinds of machine roller molds, high processing accuracy, good product consistency, is an indispensable tool for processing high-end molds

ultra-micro hole punching machine,punching machine,Non-Woven Punching Machine,Non-Woven Fabric Breathable Punching Machine,Non-Woven Film Perforating Machine,Non Woven Perforated Machine

Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.czsmmsmachine.com