DX 1100 Cold Bending Metal Sheet Roof Tile Forming Machine from China
DX1100-220-28 Glazed Tile Roll Forming Machine
**Technical Specifications:**
1. Material: Colored steel sheet, galvanized steel sheet, aluminum sheet
2. Coil Thickness: 0.3–0.8 mm
3. Roller Material: High-grade No. 45 forged steel with hard chrome plating (0.05 mm thick)
4. Shaft Material: High-grade No. 45 carbon wrought steel
5. Cutting Blade: Cr12 mold steel with quenching treatment
6. Shaft Diameter: 70–90 mm
7. Medium Plate Thickness: 14 mm
8. Main Frame: 300H/U steel
9. Number of Forming Steps: 15 rows
10. Productivity: 6–10 m/min
11. Main Motor Power: 4 kW
12. Hydraulic Station Power: 4 kW
13. Hydraulic Pressure: 10–12 MPa
14. Control System: PLC computer control
15. Voltage: 380V, 3-phase, 50Hz or as per buyer’s requirement
**Packaging:**
Standard waterproof packaging. Iron wire is required to secure the machine in the container.
**Maintenance Tips:**
- Keep the equipment clean and avoid exposure to mud or water.
- Regularly lubricate gears, chains, and moving parts to reduce friction and prevent rust.
**Service & Support:**
1. One-year warranty after delivery and lifelong technical support.
2. If any part fails during the warranty period, DIXIN will do its best to assist, but shipping and other costs must be covered by the customer.
3. On-site training is available, though it's usually not required. The training period lasts up to one week, with the customer covering visa, return ticket, food, accommodation, and a daily wage of USD 80.
**Contact:**
Bella Hao
+86 18231723279




1. Uncoiler and its base |
2. Coil sheet guiding equipment |
3. Roll forming system |
4. Hydraulic pressing equipment |
5. Post cutting equipment |
6. Hydraulic station |
7. Controlling system |
8. Supporter table |

Bimetallic Parallel Screw and Barrel
The outer surface of the screw is cut into a cylinder with a spiral groove or a cone with a tapered spiral groove. The screw has a different head, the head is called an external hexagonal screw. There are others, such as large flat screws, hexagon socket screws and so on.
Commonly used screw materials in China are No. 45 steel, 40Cr, ammoniated steel, 38CrMOAl, high-temperature alloys and so on.
Bimetallic Parallel Screw And Barrel,Barrel Screw For Extruder,Screw And Barrel Set,Barrel Screw
ZHOUSHAN JINTANG OULIN MACHINERY CO., LTD. , https://www.oulinscrewbarrel.com