In recent years, more and more construction sites and homes have rapidly increased the demand for construction of electric heating membranes and floor heating, which is related to the selection of materials for electrothermal membrane engineering, installation procedures of electrothermal membranes, and moisture protection.
Electric film project material selection The most critical 1, electric film base material determines the surface leakage current level, blindly choose the low-cost electric film, it may be some manufacturers of test film, not only the product is unstable, there are many unpredictable The result of use.
2, the other is the choice of connection card, connection between the electric heating film and the power line connection components, the key component of this component is conductive, so the use of the material should be selected "copper" material clip, copper than brass conductive properties Well, the resistance will also have a big impact, of course, the price is different.
3, power line, first of all should carefully calculate the design power. The power cord should be a national standard BVR soft copper wire, which can be better connected as electrical conduction when the connection clips are pressed together.
4, electrothermal membrane compression pliers selection, the front end of the pliers press card should choose the oblique pliers, which is tight within the loose, from the mechanical point of view in the force, the front of the most difficult, if it is The mouth is tight. At most, it becomes flat when it passes through.
5, the connection of the clip, when connecting the electric film should not be, the card directly on both sides of the electric film, there should be one side inserted in the gap between the copper and silver paste, which means that the card has one side can be completely exposed to the copper The other side is pressed by the front side of the electric film. .
6, the choice of thermostat, first on the basis of your clear design power, according to the design power, choose the thermostat should leave 20% of room, that is, power. The power of the thermostat may be 25 amps, but many of the internal relays are inadequate, so we have to leave some room for ourselves.
7. Moisture protection is a key part of the project. We will avoid the heavy fog during construction. Because construction works are involved, cross-construction of various types of work is often required. Therefore, our on-site coordination capability is critical.
8, the surface should have a layer of soft medium material, you can choose tarps, non-woven fabrics, if the site is relatively large, more complex personnel, with not very good, the best choice for comparison after the waterproof cloth, this The layer of soft medium can well mitigate the damage of sand and stone to the moisture barrier.
Xi'an Huayang Electric Heating Engineering Co., Ltd. is located in Xi'an, the ancient capital of the thirteenth dynasty. The registered capital of the company is 12 million yuan. It is a high-tech enterprise integrating the development, production, processing, design, construction and maintenance of thermal film.
Huayang Electric Engineering Co., Ltd. uses imported international high-quality electrothermal membranes as raw materials for secondary deep processing. Pvc packaging of imported electric film and change the traditional electric film connection method, the packaged electric film with waterproof rating higher than the national standard T-type cable for connection. Completely solve the problems caused by the aging of the electric film under the bare film construction and excessive discharge current caused by tripping. This technical product has passed the national quality supervision inspection and quarantine, ISO 9001:2000 product quality system certification, ISO 14001:2004 environmental protection system certification, European Union CE certification and the United States UL electrical appliance safety certification, and the product is underwritten by the quality of internationally renowned insurance companies.
Electric film project material selection The most critical 1, electric film base material determines the surface leakage current level, blindly choose the low-cost electric film, it may be some manufacturers of test film, not only the product is unstable, there are many unpredictable The result of use.
2, the other is the choice of connection card, connection between the electric heating film and the power line connection components, the key component of this component is conductive, so the use of the material should be selected "copper" material clip, copper than brass conductive properties Well, the resistance will also have a big impact, of course, the price is different.
3, power line, first of all should carefully calculate the design power. The power cord should be a national standard BVR soft copper wire, which can be better connected as electrical conduction when the connection clips are pressed together.
4, electrothermal membrane compression pliers selection, the front end of the pliers press card should choose the oblique pliers, which is tight within the loose, from the mechanical point of view in the force, the front of the most difficult, if it is The mouth is tight. At most, it becomes flat when it passes through.
5, the connection of the clip, when connecting the electric film should not be, the card directly on both sides of the electric film, there should be one side inserted in the gap between the copper and silver paste, which means that the card has one side can be completely exposed to the copper The other side is pressed by the front side of the electric film. .
6, the choice of thermostat, first on the basis of your clear design power, according to the design power, choose the thermostat should leave 20% of room, that is, power. The power of the thermostat may be 25 amps, but many of the internal relays are inadequate, so we have to leave some room for ourselves.
7. Moisture protection is a key part of the project. We will avoid the heavy fog during construction. Because construction works are involved, cross-construction of various types of work is often required. Therefore, our on-site coordination capability is critical.
8, the surface should have a layer of soft medium material, you can choose tarps, non-woven fabrics, if the site is relatively large, more complex personnel, with not very good, the best choice for comparison after the waterproof cloth, this The layer of soft medium can well mitigate the damage of sand and stone to the moisture barrier.
Xi'an Huayang Electric Heating Engineering Co., Ltd. is located in Xi'an, the ancient capital of the thirteenth dynasty. The registered capital of the company is 12 million yuan. It is a high-tech enterprise integrating the development, production, processing, design, construction and maintenance of thermal film.
Huayang Electric Engineering Co., Ltd. uses imported international high-quality electrothermal membranes as raw materials for secondary deep processing. Pvc packaging of imported electric film and change the traditional electric film connection method, the packaged electric film with waterproof rating higher than the national standard T-type cable for connection. Completely solve the problems caused by the aging of the electric film under the bare film construction and excessive discharge current caused by tripping. This technical product has passed the national quality supervision inspection and quarantine, ISO 9001:2000 product quality system certification, ISO 14001:2004 environmental protection system certification, European Union CE certification and the United States UL electrical appliance safety certification, and the product is underwritten by the quality of internationally renowned insurance companies.
Speciality Silicones,Linear Polysiloxane Compounds,Silicone Oil For Treadmill,Silicone Oil For Lubricant
Henan Minmetals East New Materials CO. LTD. , https://www.eastmaterials.com