Five tons truck crane maintenance knowledge

    In order to enable the normal operation of the five-ton truck while it is in use, it is necessary to perform maintenance in daily use. The so-called maintenance is to check whether there is a faulty location or the like and a series of operations. The normal maintenance of the vehicle is related to the service life of the vehicle and the safety of the driver. If the maintenance or use is improper, it will cause the vehicle to malfunction and bring about security risks. So how do you do a simple and practical maintenance, the simplest is to carefully study a series of documents included in the “User Manual” that comes with the car when you purchased the 5-ton truck crane. Generally, there are detailed precautions and maintenance methods for use. Xiao Bian here also has some simple maintenance knowledge, to share this to everyone, hoping to help some people.

    吊车

    1, check the engine oil remaining: the five tons Crane parked on a level road, travel scale check oil level, if indicated in the "F" and "L" in two of the reticle is in the range of normal oil If it is lower than " L ", then it is necessary to add oil suitable for its engine model. Note that the oil level should not exceed the " F " position.

    2 , engine coolant inspection: here to note that when the engine is in the heat state can not open the radiator cover, otherwise it may be high-temperature steam burns, need to wait until the engine cooling after checking whether the coolant is sufficient, plus The liquid level cannot exceed the full level.

    3 , brake fluid inspection: brake fluid is also a standard range, if the brake fluid is close to the minimum standard or below the minimum standard, it indicates that the system may have leakage or brake shoe wear excessive conditions, should be timely Go to the repair station for maintenance.

    4. Check the tires: a month should be at room temperature to detect a tire air pressure, air pressure when you need to add supplements should not be too high, however, if there are cracks and other phenomena will be replaced with new tires.

    5 , air filter detection: dirty air filter will cause the engine to work properly, excessive fuel consumption and other conditions, in serious cases may also damage the engine. If it is just a matter of returning to the city with high-pressure air, it can be blown from the inside out, but if it is too dirty, it must be changed in time.

    Of course, Xiao Bian knew that the maintenance knowledge of the 5-ton truck crane was only a little bit. Actually, the 5-ton truck was asked by the university to maintain it. The maintenance was not only satisfactory but also able to extend its use. Lifespan, which is why some people open long-term short-lived. Don't forget to check the condition of the battery here. Check if the battery is fastened and the electrolyte is in a proper position. Keep positive and negative battery cables in good contact, and keep the battery clean and dry. If you find that the battery is obviously insufficient, charge it in time.


    Chain

    Welded Link Chains,Link Chains,Galvanized Chain

    Yangzhou Jieerte Steel Cable Co., Ltd , https://www.nbjieertesteelcable.com

    Previous Post: Easy Transport Yhzs35 (35m3) Mobile Concrete Batching Plant
    Next Post: 6.98 tons Do you believe this is the weight of a truck?
    Home
    Recent Posts
    • 500kgs Permanent Magnetic Lifter/Lifting Magnet
    • Hot Sale Flexible Magnetic Strips for Knife Hold…
    • Mini 1/4′′ 3/8′′ 1/2′′ Inside and Ou…
    • Precautions with remote magnetic flap level gaug…
    • Concept of internal structure of the process
    • Switzerland develops edible temperature sensor t…
    • Historical development and classification of ore…
    • Layout of new energy and the country's six F…
    • How to repair dynamometer
    • "2017 Autopilot "Separate Report"…
    • Ma Stainless Steel Pneumatic Mini Cylinder
    • Grinding machine spindle performance analysis si…
    • Modern teamed up with Beiqi Zhongqi to seek comm…
    • 3D Printer Prototype 5 Axis CNC Prototype 3D Pri…
    • Air Cooled Industrial Chiller for Plastic Machin…
    • The high-speed rail stock market evaporates 39.9…
    • ISO DIN ANSI Kana JIS Standard Plastic Bevel Gea…
    • Bridgestone North American Technology Center awa…
    • Seized 200 orders Yuchai YC6K engine won the fav…
    • Twisting method for bevel gear thermal distortio…