There are many qualities that affect the quality of flame cutting, where the cutting oxygen flow plays a crucial role in gas flame cutting. The cutting of the oxygen stream requires both the burning of the metal and the burning of oxides from the incision. Therefore, the purity of cutting oxygen has an important influence on the quality of cutting and cutting speed.
Commonly used CNC flame cutting machine gas includes propane, acetylene, natural gas, gasoline, liquefied petroleum gas, and so on. Their common point is that they can form local high temperatures when burning. When used in CNC flame cutting machine, in order to better improve the cutting quality, make gas If it can be burned to form a higher temperature, it will usually be supplemented with oxygen with a higher purity. Then, relative to enterprises and users, how to control and grasp the purity of cut oxygen is even more important. The following Wuhan Guardian CNC Technology Co., Ltd. based on its many years of experience in the development and production of CNC flame cutting machine, to provide some suggestions:
In the process of flame plasma cutting machine, the purity of oxygen is an important factor affecting the gas cutting process and quality. Oxygen purity is poor, not only the cutting speed is greatly reduced, the cutting surface is rough, the bottom edge of the cut is slagging, and the consumption of oxygen is increased. Oxygen purity decreased from 99.5% to 98%, that is, a decrease of 1.5%, cutting speed decreased by 25%, and oxygen consumption increased by 50%.
It is generally believed that if the oxygen purity is lower than 95%, gas cutting cannot be performed. To obtain a gas-cut cut without sticky slag, the oxygen purity must reach 99.6%. So for the flame CNC cutting machine, the purity of oxygen can not be ignored!
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
The trends of the copper chips briquetting recycling industry
As a result of machining, a vast amount of metal chips are formed. These metallic chips can be directly pressed into briquettes by using a metal briquetting press and recycled by melting.
Recycling metals also requires less energy than producing new metals. Also conserves natural resources. Recycling conserves diminishing natural resources.
It`s much more affordable to resue the metal chips that you have by building an effective recycling system, using the hydraulic metal briquetting press to do that, Most companies recycle on the basis that it`s cheaper to do so.
What is the role of a metal briquetting press in copper chips recycling?
The Metal Briquetting Press Machines increase the value of different kinds of metal chips, loose turnings and swarf by compressing them into near solid, dry briquettes for scrap metal recycling to send to the recycler or feed to the furnace.
The Hydraulic Metal Briquetting Press makes your metal recycling more efficient and profitable.
How to choose a suitable metal briquetting press?
The Y83 series metal Scrap Briquetting Press is used to pressing various metal shavings into high-density metal briquettes, which can press various metal shaving materials such as steel shavings, aluminium shavings, copper shavings, cast-iron shavings, bronze shavings and so on.
With high-density compression, compact and strong. Low energy consumption but fast production rate.
The Y83 series hydraulic briquetting press is divided into Y83 conventional structure, Y83L pre-pressing structure, Y83W horizontal structure, YW1 and YW2 horizontal structure.
Y83-Vertical Metal Briquetting Press (Conventional structure)
Y83L-Vertical Metal Briquetting Press (Pre-pressing structure)
Y83W-Horizontal Metal Briquetting Press (Horizontal structure)
YW1-Horizontal Metal Briquetting Press (Horizontal structure)
YW2-Horizontal Metal Briquetting Press (Horizontal structure)
We provide a variety of models of the Aluminum Metal Briquetting press Machine, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Automatic Aluminum Briquetting Press can be customized and extended according to the actual needs of your on-site.
CONTACT YMSRECYCLING
Call us now on +86-15950122559
To start maximising your returns from your aluminum metal recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
Copper Briquetting Press,Copper Scrap Briquetter,Copper Scrap Briquetting Press,Hydraulic Copper Briquetting Press Machine
Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com