Roll forming, also spelled rollforming, is a type of rolling involving the continuous bending of a long strip of sheet metal (typically coiled steel) into a desired cross-section. The strip passed through sets of rolls mounted on consecutive stands, each set performing only an incremental part of the bend, until the desired cross-section (profile) is obtained. Roll forming is ideal for producing constant-profile parts with long lengths and in large quantities
Company catalog
Our factory is specialized in different kinds of roll forming machine ,also we can design the machine according to you products details :
Roofing and wall panel roll forming machine ,Glazed tile roll forming machine ,Roof ridge cap roll forming machineÂ
Shutter door roll forming machine ,Pu foam shutter door production line,Door frame roll forming machineÂ
Ceiling keel roll forming machine,Tee grid roll forming machine ,C&Z purlin roll forming machine
Floor decking roll forming machine,Pipe roll forming machine and bending machineÂ
Gutter roll forming machine,Guardrail roll forming machine,Stone coated steel tile production lineÂ
Sandwich panel production line ,Slitting line,Curving machine,Decoiler,Cutting and bending machine
Â
SPECIFICATIONS FOR Â ROLL FORMING MACHINE | |||
Â
uncoiler
|
Operation |
Manual |
|
Weight capacity |
5 ton |
||
Sizes |
About 1300*1000*1000mm |
||
Main forming machine
Â
|
Rollers material |
No.45 steel with chrome coating |
|
Roller station |
18 stations |
||
Machine wall thickness |
40mm |
||
Â
PLC control systemÂ
|
PLC |
Delta |
|
Frequency |
Delta |
||
Language |
Chinese,English |
||
servo motor |
power |
7.5KW |
|
accepting table |
lenght |
4 meters |
|
Main Features of glazed steel tile roll forming machine
Rollers material :No.45 steel with chrome coating
Shafts diameter (Solid): ¢80mmÂ
cutter blades:Cr 12Â
speed :7-8m/min
Roller station :18rows
Main power :7.5KW
Pedestal: 350H steel
Voltage :380V,50HZ,3phase
Machine wall thickness :40mm
Chain :1.2inch
Weight About :4 .8tons
Sizes :8500*1400*1300mm
Â
Roll forming Machine Parts
Name: uncoiler
Operation :Manual/ hydraulic automaticÂ
Max width of coil :1250mm
Weight capacity :5 ton
Weight About :100KGS
Sizes About :1300*1000*1000mm
Main forming machie Features
Name:Â main forming machineÂ
Â
Name:Â PLC control system
PLC Delta
Frequency Delta
Language Chinese,English
Weight About 30 KGS
Size 1600*600*400mm
Name:Â hydraulic pump
power 7.5KW
Weight About 50KGS
Sizes 650*450*450mm
Pre-Sales Service
* Inquiry and consulting support
* Sample testing support.
* View our Factory.
Â
After-Sales Service
* Training how to instal the machine, training how to use the machine.Â
* Engineers available to service machinery overseas.
Â
Packaging | |
Packing method: nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipment will be moisture-proof, anti corrosive, and will not be damaged during transportation.  | |
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi(1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. How to get a quotation?
a. Give me the profile drawing and thickness, this is the important. If no,I will suggest you some.
b. Other specific requirements are welcome, such as the speed, power and voltage you want.
5. What can you do if the machine broken?
Our machine's warranty period is 12months! If the broken parts can't repair, we can send the new parts replace the broken parts free. If after warranty period,we can through negotiation for to solve the problems, and we supply the technical support for the whole life of the equipment.
6. Can you be responsible for transport?
Yes, please tell me the destination port or address. We have rich experience in transport.
7. You are trade company or factory?
We are factory. Welcome to our workshop for visiting.
8. How long the machine could be made?
Normally speaking, common roof profile roll forming machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a month.
8:If need more machine pictures or videos,welcome to contact me.
Â
Roll forming, also spelled rollforming, is a type of rolling involving the continuous bending of a long strip of sheet metal (typically coiled steel) into a desired cross-section. The strip passed through sets of rolls mounted on consecutive stands, each set performing only an incremental part of the bend, until the desired cross-section (profile) is obtained. Roll forming is ideal for producing constant-profile parts with long lengths and in large quantities
Company catalog
Our factory is specialized in different kinds of roll forming machine ,also we can design the machine according to you products details :
Roofing and wall panel roll forming machine ,Glazed tile roll forming machine ,Roof ridge cap roll forming machineÂ
Shutter door roll forming machine ,Pu foam shutter door production line,Door frame roll forming machineÂ
Ceiling keel roll forming machine,Tee grid roll forming machine ,C&Z purlin roll forming machine
Floor decking roll forming machine,Pipe roll forming machine and bending machineÂ
Gutter roll forming machine,Guardrail roll forming machine,Stone coated steel tile production lineÂ
Sandwich panel production line ,Slitting line,Curving machine,Decoiler,Cutting and bending machine
Â
SPECIFICATIONS FOR Â ROLL FORMING MACHINE | |||
Â
uncoiler
|
Operation |
Manual |
|
Weight capacity |
5 ton |
||
Sizes |
About 1300*1000*1000mm |
||
Main forming machine
Â
|
Rollers material |
No.45 steel with chrome coating |
|
Roller station |
18 stations |
||
Machine wall thickness |
40mm |
||
Â
PLC control systemÂ
|
PLC |
Delta |
|
Frequency |
Delta |
||
Language |
Chinese,English |
||
servo motor |
power |
7.5KW |
|
accepting table |
lenght |
4 meters |
|
Main Features of glazed steel tile roll forming machine
Rollers material :No.45 steel with chrome coating
Shafts diameter (Solid): ¢80mmÂ
cutter blades:Cr 12Â
speed :7-8m/min
Roller station :18rows
Main power :7.5KW
Pedestal: 350H steel
Voltage :380V,50HZ,3phase
Machine wall thickness :40mm
Chain :1.2inch
Weight About :4 .8tons
Sizes :8500*1400*1300mm
Â
Roll forming Machine Parts
Name: uncoiler
Operation :Manual/ hydraulic automaticÂ
Max width of coil :1250mm
Weight capacity :5 ton
Weight About :100KGS
Sizes About :1300*1000*1000mm
Main forming machie Features
Name:Â main forming machineÂ
Â
Name:Â PLC control system
PLC Delta
Frequency Delta
Language Chinese,English
Weight About 30 KGS
Size 1600*600*400mm
Name:Â hydraulic pump
power 7.5KW
Weight About 50KGS
Sizes 650*450*450mm
Pre-Sales Service
* Inquiry and consulting support
* Sample testing support.
* View our Factory.
Â
After-Sales Service
* Training how to instal the machine, training how to use the machine.Â
* Engineers available to service machinery overseas.
Â
Packaging | |
Packing method: nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipment will be moisture-proof, anti corrosive, and will not be damaged during transportation.  | |
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi(1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. How to get a quotation?
a. Give me the profile drawing and thickness, this is the important. If no,I will suggest you some.
b. Other specific requirements are welcome, such as the speed, power and voltage you want.
5. What can you do if the machine broken?
Our machine's warranty period is 12months! If the broken parts can't repair, we can send the new parts replace the broken parts free. If after warranty period,we can through negotiation for to solve the problems, and we supply the technical support for the whole life of the equipment.
6. Can you be responsible for transport?
Yes, please tell me the destination port or address. We have rich experience in transport.
7. You are trade company or factory?
We are factory. Welcome to our workshop for visiting.
8. How long the machine could be made?
Normally speaking, common roof profile roll forming machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a month.
8:If need more machine pictures or videos,welcome to contact me.
Â
Volvo Truck Parts,Custom Truck Parts,Volvo Trucks Parts
Hana Auto Parts Co., Ltd. , http://www.zjautomirrors.com