Chassis model: JX1060TG24 Shunda single row, wheelbase: 3360MM, JX493ZLQ4 power 80KW, single row cab, not forwardable, 7.00 wire tire, oil brake, five gear box, front axle 1.5 tons, rear axle 3 tons, belt row Air brake.
Installation configuration: volume (m3) 1.5 water / 4 dust, auxiliary engine Isuzu 75 horsepower, the main configuration: 1. Center 4 sweeping disk, new strong motor, Schneider control switch, Hai Risen solenoid valve group, Xiamen Nanchao automatic clutch , maintenance-free centrifugal fan, stainless steel garbage can, Wenzhou Xinxishan electronic water pump, dustbin lifting and unloading, tail LED arrow light, manual pump emergency system
2. Sweep width 2.6M-3.2M, suction particle size Φ120mm 3. Optional configuration: sprinkle before flushing, self-cleaning function of garbage bin, monitoring of reversing image operation.
ã€The main technical parameters】
Product trademark Chusheng
Announcement batch 287
Product Name CSC5060TSLJ4 Sweeper
Product No. ZJU3758F04G
Total mass (Kg) 5790
Tank volume (m3)
Rated load mass (Kg) 1050
Dimensions (mm) 5825×1980×2350
Curing quality (Kg) 4610
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 2
Load mass utilization factor
Approach angle / departure angle (°) 27/18
Front overhang / rear overhang (mm) 1015/1450
Number of axes 2
Wheelbase (mm) 3360
Axial load (Kg) 2200/3590
Maximum speed (Km/h) 90
Other left and right sides are equipped with special working devices; the rear protection of the vehicle is cold-formed steel/Q235A, welded, the section width is 100mm, the height is 50mm, and the lower edge is 450mm from the ground. ABS system model, ABS system manufacturer: Zhejiang Asia-Pacific Mechanical and Electrical Co., Ltd. (This article comes from Xiagong Chusheng)
Welded Wire Mesh,Hot Dipped Galvanized Welded Mesh,Galvanized Welded Wire Mesh,Wire Mesh Plaster Walls
HEBEI CONQUER HARDWARE WIRE MESH CO.,LTD , https://www.conquerwiremesh.com