Yesterday, the reporter learned from the Provincial Department of Transportation and the Provincial Price Bureau that after the unified highway toll standards in the province, the speed of seven high-speed two to five types of vehicles, such as Guangshen and Huasheng, was reduced by 10%-30%, but due to charges. The change in the amount of "rounding principle" has also led to the "no fall and rise" of some types of highways.
Yesterday, the Provincial Department of Transportation and the Provincial Price Bureau made a statement that, in order to avoid the trouble of finding zero banknotes and improve the traffic efficiency of vehicles, the amount of Guangdong highway tolls was rounded up according to the following methods: if the amount of charges is less than 10 yuan, rounding off by yuan If the amount of the charge exceeds 10 yuan, it shall be rounded off at 5 yuan and 10 yuan (that is, if the tail amount of the charge is less than or equal to 2.50 yuan, it shall not be levied; if the charge is greater than 2.50 yuan and less than 7.50 yuan, 5 yuan is charged; if the mantissa of the charge is greater than or equal to 7.50 yuan and less than 10.00 yuan, it shall be charged at 10 yuan).
The explanation indicates that the previous rounding principle also has the problem of multiple charges or less charges, which caused a lot of complaints. In order to ensure that the charges are fair and reasonable, the principle of rounding is adjusted to round off the rounding of the minimum billing unit by one yuan. The amount of the fee will be appropriately raised or decreased, and it will not be possible to avoid the individual charges for individual entrances and exits. The phenomenon of upward adjustment.
It is understood that there are 8 entrances and exits in the first phase of the South China Expressway. There are 140 entry and exit charges for the first to fifth class vehicles, of which 114 are down, the largest drop is 22 yuan; 13 items remain unchanged, and 13 items are appropriately increased by 1-4. yuan. There are 24 entrances and exits in the whole line of Guangzhou-Shenzhen Expressway. There are 1380 entry and exit charges for Class I to Class 5 vehicles, of which 1,253 are down, the largest drop is 82 yuan, 46 items remain unchanged, and 81 items are appropriately raised by 1-5 yuan. Among them, there were 208 items in the category of vehicle entrances and exits, and the maximum rate of decline was 6 yuan. 68 items rose by 1-4 yuan, accounting for 25% of all 276 category 1 vehicles.
One of the biggest features of forging is that it can change the metal structure and improve the mechanical properties of the metal. Therefore, generally forged parts are used on parts with relatively high strength and toughness requirements or severe working conditions. The stainless steel forgings can be used in some places with high rust and corrosion resistance requirements or particularly harsh working environments. Due to the characteristics of the forging process, forging is not suitable for machining workpieces with particularly complex shapes, and for some places with fine holes or fine grooves, forging cannot be achieved, but it can be achieved by subsequent precision CNC machining.
Due to the characteristics of the forging process, the forging processing is often matched with the subsequent secondary precision CNC processing. SCZY has independent mold design and production, forging processing and precision CNC machining departments, which can be well coordinated to achieve the best results.
Stainless Steel Forgings,Stainless Steel Forging Parts,Stainless Steel Forged,High Stainless Steel Brass Hot Forging,Stainless Steel Forging Process
Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com