Welcome to our wedsite
Jtp Mould is known as one of the best manufacturers and exporters for plastic injection moulds for household articles, chair mould, pallet mould, crate mould, automotive mould and so on. Our moulds are mainly exported to Italy, Australia,Saudi Arabia, Jordan, Argentina, Colombia, India, Malaysia, Philippines and other 20 countries.
JTP MOULD has extensive experience in plastic furniture mould manufacturing.
Plastic Table Mould: Square & round table mould, writing desk mould, garden table mould, beach table mould, baby table mould, kiddy table mould, etc.
Plastic Chair Mould: Arm chair mould, armless chair mould, baby chair mould, kiddy chair mould, aluminum leg chair mould, chair seat mould, garden chair mould, beach chair mould, gas assist chair mould, etc.
Plastic Stool Mould: Square stool mould, round stool mould, high stool mould, collapsible stool mould, baby stool mould, foldable stool mould, etc.
Plastic Storage box Mould: Plastic storage box mould with handle, plastic storage box mould with wheels, plastic transparent storage box mould, etc.
Plastic Cabinet Mould: Mini fashion cabinet mould, drawer cabinet mould, plastic jewelry box mould, etc.
Regarding to plastic furniture moulds, the parting line, wall thickness, cooling system are all important, we'll pay more special attention on mold design to offer best mold solution!
1. More detailed about Hot sell Good Texture of Plastic Chair Mould
Name                Hot sell Good Texture of Plastic Chair Mould
Mould material        P20
Cavity                1 cavity
Runner               cold runner
Mould design          3D/2D
Design days           1-2 days
Mould life             500, 000 shots
Plastic material        PP
Injection system        direct gate
Payment               40% of deposit by L/C T/T 60% of balance by L/C T/T
Delivery time           60 days
Specification           depends on customers' demand
2. Order Process For Mould From JTP mould
Stage 1
Make product design drawing as per original sample or customer's concept
Get machine specs from buyer
Plan mould specification
Stage 2
Make mould drawings according to the buyer's requirments & machine specs.
Approval of mould drawings by the buyer's
Stage 3
Order steel & standard parts and start machining work on core, cavity & mould base
Fitting, adjusting, polishing
Detailing & Assembly
Stage 4
First trial -To check mould injection dimensions, fittings and mark corrections
Second trial-Detailed inspection, corrections
Stage 5
Send mould testing video & photos to the buyer
Send trial samples by courier to customer and take approval
After do final corrections, do final trial-inspection
Stage6
Pack moulds with wooden case
Delivery mould by sea or by air
3. Our main business line
1) Household moulds: Plastic chair, table, buckets, laundry basket, trash bin, kitchenware, plastic sanitary ware mould, plastic container mould, etc.
2) Industrial moulds: Pallet mould, crate mould, paint container mould, plastic industrial part mould, plastic dustbin mould, etc.
3) Thin wall moulds: Thin wall cup, thin wall tablewares, etc.
4) Pipe fitting moulds: PPR pipe fittings, PE, PVC pipe fittings.
5) Packaging moulds: Blowing mould, pet bottle mould, Cap mould, etc.
6) Other mould: Syringe mould, Medical plastic mould, Other OEM mould
4. Our advantages
Professional plastic mould maker
Exported to many countries
Detailed production schedule
Punctual delivery
Good After-sale service
5. Offers you
Response on Email, telephone calls or fax in-time
Supply the quotation and mould designs in-time
Communication on the technical points in-time
Sending pictures for the mould machining progress and mould finishing Schedule in-time
Mould test and sample delivery in-time
Why say closed cooling tower is energy saving and environmental protection equipment, more and more users are using this kind of equipment to replace the original equipment (open tower), we can through data analysis and comparison, the two energy data accounting can be obvious. Energy consumption is basically two major aspects, one is water, the other is electricity. Both are energy costs that no cooling tower can escape, unless you leave the equipment on.
First of all, look at the consumption of water. Water is generally consumed in two aspects. One is the flying overflow after spraying, and the other is the evaporation consumption of water.
Let's look at the open cooling tower, the spray water of the tower is basically between two and three percent of the overflow rate, if we according to the daily operation of 10 hours, excluding holidays, 280 days of operation. According to the actual open cooling tower flow of 6000 cubic meters per hour to calculate. 6000*2%*10*280= 336,000 tons of water, and the same closed cooling tower, its spray flying overflow is very small, because after all, the spray work is carried out in the tower, almost can be controlled in a few thousandths, we calculate according to 5 thousandths, the same is 10 hours of work, 280 days a year operation, To achieve the same cooling amplitude is basically 4,500 tons per hour of closed cooling tower is enough, then the calculation results: 4,500 *0.5%*10*280= 63,000 tons, it is not difficult to see, because of the different design structure caused by the waste of spraying water resources, more than 200,000 tons of terror. The bigger the pool of the open tower, the more wasted water, because the evaporation area increases, and the closed cooling tower has no pool, so the consumption here is zero. Judging from the price of a ton of water, just such a equipment, a year to solve the capital of hundreds of thousands of enterprises.
Let's look at the comparison of electric energy, electric energy is not different, because they are all through the same power equipment to operate the equipment, the power of the two is similar, the running time is the same, basically the energy consumption is about the same.
To sum up, for the closed cooling tower energy saving accounting can be strong to open the tower out, and, today are advocating energy conservation and environmental protection, this is the general trend, so the closed cooling tower is more and more favored by the majority of users.
Closed Cooling Tower,Closed Circuit Cross Flow,Closed Loop Cooling Tower,Closed Circuit Cooler
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com