It is reported that up to now, Japan's JFE has received orders for ballast water treatment systems for more than 250 ships.
In May 2010, the JFE BallastAce ship ballast water treatment system developed by Jefferies was awarded the type approval by the Ministry of Land, Infrastructure, Transport and Tourism of Japan. In the more than two years since then, the system has been equipped for multi-type new ships and operating ships. Its single machine has a maximum processing capacity of 4,500 cubic meters per hour. The ballast water is treated by direct addition of fungicides. The treatment effect can meet the requirements of the US Coast Guard (USCG) and California ship ballast water discharge standards; for salt water, half Salt water, fresh water, turbid water, etc. can be reliably treated; less power consumption, less pressure loss; flexible installation, both modular and distributed installation; simple maintenance, low maintenance costs, all zeros except seals Parts can be used permanently.
In May 2010, the JFE BallastAce ship ballast water treatment system developed by Jefferies was awarded the type approval by the Ministry of Land, Infrastructure, Transport and Tourism of Japan. In the more than two years since then, the system has been equipped for multi-type new ships and operating ships. Its single machine has a maximum processing capacity of 4,500 cubic meters per hour. The ballast water is treated by direct addition of fungicides. The treatment effect can meet the requirements of the US Coast Guard (USCG) and California ship ballast water discharge standards; for salt water, half Salt water, fresh water, turbid water, etc. can be reliably treated; less power consumption, less pressure loss; flexible installation, both modular and distributed installation; simple maintenance, low maintenance costs, all zeros except seals Parts can be used permanently.
CTK-KC600
1. Grooving on HSS Saw Blade teeth can improve Saw Blade cutting ability, reduce tube end burs, extend life time and decrease cutting cost.
2. The machine can make groove on teeth in one circle.
3. The machine working parts move right and left, up and down pneumatically. The groove depth is adjusted mechanically.
4. Super speed spindle(RPM20000-30000) makes the machine be able to groove on HSS saw blade and tungsten carbide saw blade.
Saw Blade Slotting Machine,Grinder To Circular Saw,Circular Saw For Grinder,Pneumatical Saw Blade Slotting Machine
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com