Line Type Scrap Copper Wire Shredder and Granulator Machine

  Scrap Wire Shredder Features: 
JLF series scrap wire shredder is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet.
JLF-800 (capacity:600-800kg/h) is complete processing line for copper wire recycling which is applicable for large size factory. It includes first crusher, second shredder,separator and dust collector. It can deal with larger size scrap cooper cables with higher efficiency.



Scrap Wire Shredder Application:  If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE! 

Scrap Wire Shredder Specifications: 
Scrap Wire Shredder Components: 


Scrap Wire Shredder Description:
1.Frist Crusher: This is double shaft crusher to cut raw materials(cables) to small pieces before they enter second shredder. 
2.Second Shredder: The shredder cut the crushed cable to small pellet. 
3.Copper pellet exit: Clean copper pellet go out of this outlet. 
4.Plastic pellet exit: Clean plastic pellet go out of this outlet. 
5. Vibrating separator: Crushed copper and plastic go through this vibrator and be separated.

We also produce single machine with smaller capacity.
Please contact with us to get more information!


Scrap Wire Shredder Working Principle: 
1. The first crusher of  the recycling plant crushes the wires/cables into 10-20mm length.
2. By conveyor, crushed wires/cables are conveyed to the second crusher, which crush them again into 3-5mm length plastic pieces and copper granules.
3. The mixture is sent to the vibration system. By airflow and vibration, plastic pieces are separated from copper granules thoroughly.
4. Copper granules and plastic pieces come out of the granulator from different outlet. Dust is collected by dust collector through air duct.



Scrap Wire Shredder Packing&Shipping: 
One set JLF-800 recycling line requires 1 piece 40'container for shipping, and we will pack the machine with plastic film firstly or pack it with ply wooden case as customers'requirement. 


Scrap Wire Shredder Factory Introduction:
 Liyang Tongfu Machinery Co.,Ltd is professional manufacturer who specialized on recycling and new energy(environmental filed). 
We proposes that"remarkable quality practical innovation" Welcome customers contact us for ture business relationships and achieving mutual success also establishes the long-term friendly cooperation.



Contact information:

Attn: Tina 
Mobile:+8615981925357 
    Scrap Wire Shredder Features: 
JLF series scrap wire shredder is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet.
JLF-800 (capacity:600-800kg/h) is complete processing line for copper wire recycling which is applicable for large size factory. It includes first crusher, second shredder,separator and dust collector. It can deal with larger size scrap cooper cables with higher efficiency.



Scrap Wire Shredder Application:  If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE! 

Scrap Wire Shredder Specifications: 
Scrap Wire Shredder Components: 


Scrap Wire Shredder Description:
1.Frist Crusher: This is double shaft crusher to cut raw materials(cables) to small pieces before they enter second shredder. 
2.Second Shredder: The shredder cut the crushed cable to small pellet. 
3.Copper pellet exit: Clean copper pellet go out of this outlet. 
4.Plastic pellet exit: Clean plastic pellet go out of this outlet. 
5. Vibrating separator: Crushed copper and plastic go through this vibrator and be separated.

We also produce single machine with smaller capacity.
Please contact with us to get more information!


Scrap Wire Shredder Working Principle: 
1. The first crusher of  the recycling plant crushes the wires/cables into 10-20mm length.
2. By conveyor, crushed wires/cables are conveyed to the second crusher, which crush them again into 3-5mm length plastic pieces and copper granules.
3. The mixture is sent to the vibration system. By airflow and vibration, plastic pieces are separated from copper granules thoroughly.
4. Copper granules and plastic pieces come out of the granulator from different outlet. Dust is collected by dust collector through air duct.



Scrap Wire Shredder Packing&Shipping: 
One set JLF-800 recycling line requires 1 piece 40'container for shipping, and we will pack the machine with plastic film firstly or pack it with ply wooden case as customers'requirement. 


Scrap Wire Shredder Factory Introduction:
 Liyang Tongfu Machinery Co.,Ltd is professional manufacturer who specialized on recycling and new energy(environmental filed). 
We proposes that"remarkable quality practical innovation" Welcome customers contact us for ture business relationships and achieving mutual success also establishes the long-term friendly cooperation.



Contact information:

Attn: Tina 
Mobile:+8615981925357 
 

Coal-Based AC

Coal-Based AC,Coal Power Station ,Coal Fired Power Stations ,Coal Power

Mining Crusher Co., Ltd. , http://www.nbhookahcharcoal.com