Locomotive has its own "treadmill"

    The first high-power electric locomotive vehicle test bed debugging success

    Latest discoveries and innovations

    The first domestic high-power electric locomotive vehicle test bed, a few days ago in Wuhan Railway Bureau Wuhan high-power locomotive repair section debugging success, will be put into use in July. It can replace the harmonious high-power electric locomotive maintenance line operation test, save rail transit positive line occupancy time, reduce commissioning risk, to fill in the past on the locomotive test run must be on the line of the blank.

    According to the person in charge of the repair section, the test rig is a complete vehicle test system developed by Wuhan High-power Locomotive Maintenance Section jointly with Beijing Railway Engineering Electromechanical Technology Research Institute. The maximum test load can reach 9,600 kW. The system can be used to simulate various test points in locomotive circuit trial operation in locomotive. The locomotive can find its dynamic fault without leaving home. So it is vividly called the locomotive "treadmill."

    The test bench is mainly used for the traction power test and electric braking power test after the harmonic electric locomotive overhaul. It is composed of four parts of foundation pit device, electrical equipment area, noise reduction and ventilation device and central operation room. It adopts the leading domestic Electric power closed technology, locomotives and test benches form a mutual exchange network on the primary side of the catenary, which can feed back the energy consumption generated by the test back to the grid through feedback, greatly reducing the energy consumption of the test, using lifting rims and track control Electronic control wheelbase adjustment technology, can quickly complete the upper and lower test bench locomotive for HXD1B, HXD2, HXD2B, HXD3 and other 7 different wheelbase models test wheelbase rapid adjustment. The test bench to complete two times a day locomotive trial work, to meet the section with an annual output of 466 locomotives overhaul trial needs.

    Gear Joint Robot Automatic Production Line

    Gear Joint Robot Automatic Production Line,Gear Joint Robot Automatic,Dry Gear Hobbing Machine,Gear Making Machine

    Zhejiang Toman Intelligent Technology Co., Ltd , https://www.tomanmachines.com

    Previous Post: Sensors become the competition for spare parts companies
    Next Post: Gear pump type and development trend
    Home
    Recent Posts
    • Quantitative air flow spore catcher gains quanti…
    • The annual inspection mark has to be so posted~ …
    • Structural design of a wet gas storage tank
    • Research on vacuum diffusion welding process of …
    • Promote the straw (grass) compression equipment …
    • Shanghai Shipyard Environmental Protection Co., …
    • GTT Technology Receives FSRU Support Order from …
    • Dongfeng Refrigerated Vehicle - Refrigerated Veh…
    • The Scania Hager Premium Passenger Car with Over…
    • The 8th Smart Water Conference convenes to launc…
    • High Precision Shot Blasting Machine Spare Parts…
    • Sichuan Chengdu Chemical Production Enables Eart…
    • What are the national policies for the parts and…
    • Ship anti-fouling coating independently research…
    • The market scale of 20 billion nurtures the unde…
    • Ultra-precision aspherical surface CNC grinding …
    • Electronic platform scale from precision
    • The misunderstanding of CNC cutting machine
    • Slotted Round Nuts for Hok Spanner, ISO Metric F…
    • The luxury car broke through the guardrail in th…