Manual Ceramic Scum / Slag Gate Valve (GPZ41TC)

Model NO.: GPZ41TC
Thread Position of Valve Rod: Outside Gate Valve
Usage: Emptying
Standard: DIN
Application: Industrial Usage
Design Pressure: Pn10-Pn40
Size: Dn50-Dn400
Connection: Flanged
Medium: Dry Ash in Power Plant, Slurry, Cement Ash, Powder
Suitable Temperature: Below 200 Deg C
Operation: Manual, Pneumatic, Electric
Trademark: GOOLE, OEM
Transport Package: Plywood Case
Specification: CE, SGS, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8481804090
Model NO.: GPZ41TC
Thread Position of Valve Rod: Outside Gate Valve
Usage: Emptying
Standard: DIN
Application: Industrial Usage
Design Pressure: Pn10-Pn40
Size: Dn50-Dn400
Connection: Flanged
Medium: Dry Ash in Power Plant, Slurry, Cement Ash, Powder
Suitable Temperature: Below 200 Deg C
Operation: Manual, Pneumatic, Electric
Trademark: GOOLE, OEM
Transport Package: Plywood Case
Specification: CE, SGS, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8481804090
Manual Ceramic Scum / Slag Gate Valve(GPZ41TC)
Characteristics:
This valve is applicable for high-hardness grains or corrosive media containing soft grains. It's used as an on-off for hydraulic coal transportation, hydralic deslagging and cinder removal and slurry transportation pipelines, with the workint medium being slag water ratio higher >1:5 and the biggest grain ≤5mm. Its working nominal pressure is from PN10 to PN40, and applicable temperature is below 200 Deg C.

All medium-contacting parts are made of structural ceramic with extremely high chemical stability and hardness. Therefore, it has extremetly strong resistance to abrasion, corrosion and erosion, good heat insulation and small thermal expansion.

Its feed inlet is fully through without any blocks, and it has an anti-blcokage blwoing unit, with strong abrasion resistance, a good sealability, a small starting load and little ash seizure or accumulation.

It adopts a high-grade toughened structural ceramic seal, featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.

Special ceramics is different from general ceramics, its hardness even more than steel,
second only to diamond, and corrosion resistant, high temperature resistant!!!!! "" metal
valve with long easy to produce the gap, ceramic valve is not. Because of wear-resisting,
anti-corrosive, sealing strong, ceramic water valve very water saving. "" our valves can be
used 500000 times, if every switch 60 times, can use 22.8 years, this is metal valve can not do it. "

Main Parts and Materials
Sr No. Parts Material Sr No. Parts Material
1 Body WCB 7 Middle Body WCB
2 Disc 304+Ceramic 8 Packing Flexible Graphite
3 Seat Ceramic 9 Packing Gland 2Cr13
4 Stem 2Cr13 10 Bracket WCB
5 Stud 35CrMoVA      
6 Nut 25      

Application Specification
1. Design and Manufacture: Manufacturer's Standard
2. Face to Face Dimension: GB/T 12221
3. Flange Dimension: GB/T 9113.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
DN PN L D D1 C H n-d  
50 10 250 160 125 16 520 4-18  
65 250 180 145 18 595 4-18  
80 280 195 160 20 635 8-18  
100 300 215 180 20 630 8-18  
125 300 245 210 22 715 8-18  
150 350 280 240 24 840 8-23  
175 350 310 270 26 885 8-23  
200 400 335 295 26 1155 8-23  
250 450 405 350 30 1400 8-23  
300 500 460 400 30 1800 12-23  

 

  Manual Ceramic Scum / Slag Gate Valve(GPZ41TC)
Characteristics:
This valve is applicable for high-hardness grains or corrosive media containing soft grains. It's used as an on-off for hydraulic coal transportation, hydralic deslagging and cinder removal and slurry transportation pipelines, with the workint medium being slag water ratio higher >1:5 and the biggest grain ≤5mm. Its working nominal pressure is from PN10 to PN40, and applicable temperature is below 200 Deg C.

All medium-contacting parts are made of structural ceramic with extremely high chemical stability and hardness. Therefore, it has extremetly strong resistance to abrasion, corrosion and erosion, good heat insulation and small thermal expansion.

Its feed inlet is fully through without any blocks, and it has an anti-blcokage blwoing unit, with strong abrasion resistance, a good sealability, a small starting load and little ash seizure or accumulation.

It adopts a high-grade toughened structural ceramic seal, featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.

Special ceramics is different from general ceramics, its hardness even more than steel,
second only to diamond, and corrosion resistant, high temperature resistant!!!!! "" metal
valve with long easy to produce the gap, ceramic valve is not. Because of wear-resisting,
anti-corrosive, sealing strong, ceramic water valve very water saving. "" our valves can be
used 500000 times, if every switch 60 times, can use 22.8 years, this is metal valve can not do it. "

Main Parts and Materials
Sr No. Parts Material Sr No. Parts Material
1 Body WCB 7 Middle Body WCB
2 Disc 304+Ceramic 8 Packing Flexible Graphite
3 Seat Ceramic 9 Packing Gland 2Cr13
4 Stem 2Cr13 10 Bracket WCB
5 Stud 35CrMoVA      
6 Nut 25      

Application Specification
1. Design and Manufacture: Manufacturer's Standard
2. Face to Face Dimension: GB/T 12221
3. Flange Dimension: GB/T 9113.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
DN PN L D D1 C H n-d  
50 10 250 160 125 16 520 4-18  
65 250 180 145 18 595 4-18  
80 280 195 160 20 635 8-18  
100 300 215 180 20 630 8-18  
125 300 245 210 22 715 8-18  
150 350 280 240 24 840 8-23  
175 350 310 270 26 885 8-23  
200 400 335 295 26 1155 8-23  
250 450 405 350 30 1400 8-23  
300 500 460 400 30 1800 12-23  

 

 

Products Description

As connecting and control crane cable for cranes and conveyors. It is suitable for the places of railway stations, Gantry Crane crane, Overhead Crane, Bridge Crane   and other related situations.

It is suitable as a control and connection crane cable for cranes and conveyors on building sites,container goods railway stations and dockyards where operating conditions are rough.

Flat Crane Cable

Properties

Sheath: special polychloreprene(Butadiene-acrylonitrile rubber), It remains flexible at -15 °C, Flame resistance and self-extinguishing.

Structure

Conductor:superfine copper strands acc.to VDE0295,CLASS 5

Insulation:mixed PVC,resistant to oil,flame resistance and self-extinguishing

Colour:acc.to 227IEC(brown,blue,black,green/yellow)

5cores or more with black number with white digital coding

Sheath:butadiene-acrylonitrile rubber;resistant to oil,flame retardant and self-extinguishing;

Colour:black(RAL9005)or grey (RAL7001)

Standard:acc.to VDE 0482,part 265-2-1 resp.EN 50265-2-1 and IEC 60332-1.

Technical data

Rated voltage:≤1.5mm 300/500V >1.5mm:450/750V

Test voltage: ≤1.5mm 2500V >1.5mm:3000V

Mimimum bending radius:0.3m<L<0.6m

Burning vertically test:GB/T1 8380.1-2001, IEC 60332-1:1993 test

Passedstandard: GB5023.6,IEC60227-6,EN 50214.

Used under the normal conditions .the temperature of conductor is lower than 70°C

Temperature range:-15°C to +70°C .

Crane cables are reommended for installations where the suspended length doesn`t exceed 80m;and the speed of travel does not exceed 4m/s.

If it is more than this ,with steel.

flat cable for crane

Parameter of crane flat cable

Type

Cores

Spec.

Width mm

Thickness mm

Weight (kg/km)

Flat Crane Cable

8

1.25

28.4±1.5

5.0±0.5

328.1

Flat Crane cable

10

1.25

34.2±2.0

5.0±0.5

399.2

Flat Crane cable

12

1.25

40.0±2.0

5.0±0.5

470.2

Flat Crane cable

14

1.25

46.8±2.0

5.0±0.5

549.7

Flat Crane cable

20

1.25

65.2±2.0

5.0±0.5

771.3

Flat Crane cable

8

1.5

29.3±1.5

5.0±0.5

343.5

Flat Crane cable

16

1.5

54.3±2.0

5.0±0.5

642.9

Flat Crane cable

18

1.5

61.3±2.5

5.0±0.5

723.7

Flat Crane cable

19

1.5

64.3±2.5

5.0±0.5

760.2

Flat Crane cable

20

1.5

67.3±2.5

5.0±0.5

796.6

Flat Crane cable

21

1.5

70.3±2.5

5.0±0.5

833.1

Flat Crane cable

22

1.5

73.3±2.5

5.0±0.5

869.5

Flat Crane cable

23

1.5

76.3±2.5

5.0±0.5

906

Flat Crane cable

24

1.5

80.3±2.5

5.0±0.5

950.3

Flat Crane cable

24

1.5

43.3±2.0

11.8±1.0

896.8

Flat Crane cable

30

1.5

56.1±2.0

10.9±1.0

1124.4

Flat Crane cable

36

1.5

61.5±2.5

11.8±1.0

1346.1

Flat Crane cable

40

1.5

72.3±2.5

10.9±1.0

1458

Flat Crane cable

42

1.5

70.5±2.5

11.8±1.0

1548.1

Flat Crane cable

48

1.5

79.5±2.5

11.8±1.0

1750.2

Flat Crane cable

54

1.5

88.5±2.5

11.8±1.0

1952.3

Flat Crane cable

4

2.5

18.7±1.5

5.7±0.5

257

Flat Crane cable

4

4

21.9±1.5

6.8±0.5

352.6

Flat Crane cable

4

6

26.9±1.5

7.5±0.5

486.5

Flat Crane cable

4

10

34.5±2.0

9.7±0.5

753.5

Flat Crane cable

4

16

38.5±2.0

10.7±1.0

1032.1

Flat Crane cable

4

25

47.0±2.0

12.8±1.0

1515.1

Flat Crane cable

4

35

56.6±2.0

15.2±1.0

2161.4

Flat Crane cable

4

50

67.6±2.5

17.4±1.0

3004.5

Flat Crane cable

4

70

74.8±2.5

19.4±1.0

3915.5

Flat Crane cable

4

95

83.0±2.5

21.6±1.0

5052.1

Advantage

crane flat cable

Processing and Packing

The crane cables can be packaged by coil or plastic reel or wooden drum or carton box and pallet or customer's request according to the type and quantity.

Flat Crane Cable price

crane flat Cable supplier

FAQ


Q 1: I didn't find the right crane cable i need in the page.

Answer: If you don't find the cabel you need,Please contact us. We produce many kinds of flexible crane cables.And we can also provide the crane cable as customers' requirements.So please contact us, We will send the e-catalog to you soon.And we will supply customization solution


Q 2:What is your Minimum Order Quantity?

Answer: Normally, 100 meters can be accecpted.For special crane cable the mininum order quantity will be negotiated.


Q 3: What is your delivery time?

Answer: Usually, we can arrange the shipment within 3-5 days if in stock. For others, the delivery time according to your quantity.


Q 4: What is your payment terms?

Answer: Our standard payment terms is 50% in advance and the balance before shipment. However, the terms can be negotiated according to quantity.


Q 5: Do you accept OEM and ODM ?

Answer: Of course OEM and ODM is accepted. We are a specialized manufacture in Shanghai China. We had accepted many OEM and ODM orders.

Crane Flat Crane Cable

Crane Flat Crane Cable,Flat Crane Cable,Flat Cable For Crane,Flexible Flat Crane Cable

Jiangxi Mide Industrial Co., Ltd. , http://www.midecrane.com