The material is evenly fed from the feed port into the vibration groove by the vibrating feeder, under the action of the exciting force generated by the vibration motor in a given direction and the hot air from the wind chamber through the air channel of the vibration plate. Fluidized state. The material transfers heat during the fluidization process, mass transfer, achieves the desired drying effect, and flows to the discharge door for discharge. The humid air is discharged by the induced draft fan and discharged through the dust collector.
application
The machine is widely used in the drying and cooling of powdery and granular materials in the chemical, light industry, medicine, food, plastics, salt and other industries.
Features
1. Reasonable structure, beautiful appearance, high drying strength and wide application range.
2, using dual motor synchronous drive, low noise and long life.
3. The amplitude of the vibration motor can be adjusted steplessly, so that the material moving speed can be adjusted, which increases the applicability.
4, suitable for the drying of crystal and fragile materials, the surface damage is small.
5, good sealing. Prevent cross-contamination of materials from the outside world.
Ford drying can be customized according to customer requirements.
1, the heater can be electric heating, steam heating, burning coal and other combustible heating gas heating.
2. This machine can be used as a cooling device, and can also be used for drying and cooling at the same time.
3. It can be equipped with screening device.
We are a mold factory with over 20 years of experience. Our products are stable, corrosion-resistant, and very durable, and can be precision processed according to customized requirements.
Special Graphite,Graphite Block,Graphite Tube,Graphite Seal Rings
Yixing Xingfeng Carbide Mould Co.,LTD , https://www.xfcarbidemould.com