Road sweepers , like people, are also very much in need of love. What can we do to make our Love Sweeper better with us? Love road sweepers must be regularly maintained, just as people also need regular medical examinations. The periodic examination of the human body can make early detection of the disease in our body and make us healthier. Love the road sweeper is the same reason, to develop good driving habits, regular love to sweep the car to do a "health check."
However, you need to know that this refueling is a seemingly simple matter, and it also contains a lot of great knowledge. Is the higher the better the gasoline labeling? Now the gasoline sold on the market has 90#, 93#, 95#, 97#, etc., the number of gasoline, try to mark the reference index of gasoline antiknock ability. It has nothing to do with fuel economy and cleanliness. It is not the higher the number, the better. Look for the recommended fuel number inside the fuel tank cap.
When the road sweeper truck is refueling, it is not possible to wait until the fuel burns out, because the fuel pump is placed on the inside of the fuel tank and is cooled by gasoline. If the fuel is running out, no fuel will be added and the fuel pump will be pumped. Heat is not damaged in time. When the fuel gauge pointer approaches or reaches the red line, you can consider refueling.
Many pilots think that the gliding to open the gap is the most fuel-efficient, but there is a great safety risk in the neutral taxiing. When the shift lever is in the man position, the driving wheel will lose its driving force. There is a loss of connection between the engine and the drive wheels, and the sweeper taxis forward on its own inertia. If there is an emergency and braking is needed at this time, but the braking force provided by the braking system is very limited at this time, the impact on the braking effect is not small. Therefore, nine points of maintenance and one minute of maintenance are the best maintenance methods for car use.
Wall Panel Roof Forming Machine
Wall panel roll forming machine is composed of material decoiler,material feeding table,main forming part,automatic cutting,control box.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.
Wall Panel Roof Forming Machine,Exterior Wall Cladding Roll Forming Machine,Exterior Cladding Sheet Roll Forming Machine,Exterior Wall Cladding Panel Making Machinery
Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com