1. COMPANY INTRODUCTION:
With over 16 years of experience in sheet metal machinery and more than 12 years in hydraulic presses, MVD is a leading manufacturer known for high-quality industrial equipment. Our company has 455 employees, including 26 R&D engineers, working across a large facility of 56,765 m², with an additional 61,321 m² new factory area. All operations are managed through our ERP system, ensuring efficiency and quality control.
We specialize in producing a wide range of machines, including:
- NC Press Brake
- CNC Laser Cutter
- CNC Punch Press
- CNC Shears
- Hydraulic Press
- Pipe & Roller Bender
- Iron Worker
- Automatic Production Line
MVD offers advanced CNC press brakes such as the 3-axis Delem DA52s and 4-axis Full Servo models. These machines are designed to meet the highest standards of precision and performance, making them ideal for a variety of industrial applications.
MVD CNC Press Brake Characteristics:
1. The MVD Press Brake provides a reliable solution for all your metal bending needs. It is a cost-effective and high-quality machine that has been installed globally.
2. With bending lengths ranging from 1.25m to 12m and a capacity up to 25mm steel, these hydraulic press brakes offer precision and performance to boost productivity and profitability.
3. All machines comply with CE standards and come with features like goose neck top tools, multi V bottom tools, motorized back gauge, and tiltable finger blocks.
4. Our team of experienced engineers ensures smooth commissioning and provides training for your staff.
Hydraulic Press Brake Features Include:
1. System Intermediate Upper Clamps with Anti-Wedges
2. Plate Support Arms
3. Powered Depth Axis
4. Backstop
5. Light Guards
6. Top and Bottom Tooling
7. DELEM CNC Control
8. Crowning Table (160T+)
9. REXROTH/HOERBIGER Hydraulic
10. TELEMECANIQUE/SCHNEIDER Electrics
11. Side and Rear Safety Guards
12. Safety Interlock Switches
Optional Delem Hydraulic Press Brake Controls:
1. The DA-41 control is ideal for conventional 2-axis MVD CNC Press Brakes. It offers flexible I/O configuration and advanced electronics for efficient programming.
2. Featuring a bright LCD display, this controller simplifies angle and tool programming, with a user-friendly interface for easy navigation.
3. Supports both servo and AC control options, allowing for two-sided or single-sided positioning depending on the application.
Press Brake DA-41 Controller Features:
1. Bright LCD Display
2. Beam Stop Control
3. Back Gauge Control
4. Angle Programming
5. Tool Programming
6. Retract Function
7. Up to 100 Programs
8. Up to 25 Bends per Program
9. Central Motorized Lubrication System
Carbon steel seamless steel pipe is a kind of long steel with hollow
section and no joints around. The steel pipe has a hollow cross-section
and is widely used as a pipeline for conveying fluids, such as pipelines
for conveying oil, natural gas, gas, water and some solid materials.
Compared with solid steel such as round steel, steel pipe has the same
bending and torsional strength and is lighter in weight. It is a kind of
economic cross-section steel, widely used in the manufacture of
structural parts and mechanical parts, such as oil drill pipe,
automobile transmission shaft, bicycle frame and steel scaffolding used
in construction.
The manufacture of ring parts with steel pipes
can improve the utilization rate of materials, simplify the
manufacturing process, save materials and processing time, such as
rolling bearing rings, jack sleeves, etc., which have been widely used
to manufacture steel pipes.
Steel pipe is an indispensable
material for all kinds of conventional weapons, and the barrel and
barrel are made of steel pipe. Steel pipes can be divided into round
pipes and special-shaped pipes according to the different shapes of the
cross-sectional area. Because the circular surface volume is the largest
under the condition of equal circumference, more fluid can be
transported with circular tubes. In addition, when the annular section
is subjected to internal or external radial pressure, the force is more
uniform, so the vast majority of steel pipes are round pipes.
The use of steel pipe to manufacture ring parts can improve the
utilization rate of materials, simplify the manufacturing process, save
materials and processing hours, such as rolling bearing rings, jack
sleeves, etc., currently has been widely used to manufacture steel pipes
carbon steel black pipe,seamless carbon steel pipe,low carbon steel pipe,carbon steel welded pipe
Shandong Fengbao Metal Products CO.,LTD. , https://www.fengbaosteels.com