Introduction: In the process of mechanical control, you will encounter alarm conditions, such as stone engraving machine over-range alarm, which is why? Description The stone engraving machine has reached its limit during operation and needs to be released in time.
Check the cause of the overtravel alarm:
1, the design of the graphics size is beyond the processing range.
2. Check whether the shaft of the stone engraving machine and the screw connection line are loose. If so, tighten the screw.
3, stone carving machine and computer is properly grounded.
4. The current coordinate value exceeds the software limit value range.
Release alarm:
1. When overtravel, all movement axes are automatically set in the jog state. As long as the manual direction key is kept pressed, when the machine leaves the limit position (that is, the switch out of the over-travel point), the connection state is resumed at any time.
2. When moving the workbench, pay attention to the direction of movement and must stay away from the limit position.
3ã€Soft limit alarm needs to clear XYZ in the coordinate setting.
The stone engraving machine meets the needs of industries such as construction and light industry. The high-tech automatic computer-controlled engraving equipment for carving calligraphy and painting on natural stone, glass and ceramics is very popular at home and abroad.
New Energy Connector,Industrial Data Connector,Industrial Waterproof Connector,Industrial Equipment Connectors
Dongguan Shangjie Precision Hardware Co., Ltd , https://www.sphzincalloy.com