Model NO.: 2XZ-1
Rotation Rate(Rotate/Min): 1400
Air Intake: 19
Oil Used(Ml): 0.4
Pump Oil Temperature: 40
Power of Electric Motor: 0.25
Size: 445*125*256
Weight: 19
Noise(dB): 66
Trademark: SUGOLD
Transport Package: Cartoon
Origin: Zhejiang
HS Code: 8414100090
Model NO.: 2XZ-1
Rotation Rate(Rotate/Min): 1400
Air Intake: 19
Oil Used(Ml): 0.4
Pump Oil Temperature: 40
Power of Electric Motor: 0.25
Size: 445*125*256
Weight: 19
Noise(dB): 66
Trademark: SUGOLD
Transport Package: Cartoon
Origin: Zhejiang
HS Code: 8414100090
Straight league rotary vane vacuum pump
Straight league rotary vane vacuum pump is used for one of the basic equipment of pumping gas seal container. It can separate effect, also can be used as booster pump, diffusion pump, moleculat pump etc's backing pump, holding pump,titanium pump to be drainage pump to use. Can be used for electric vacuum device manufacturing, vacuum flask, vacuum welding, printing, blister, reftigeration equipment repair, and form a complete set of instruments and meters,etc. Because of small volume, light quality, and low operating sound,so more suitable for using in the lab.
1.reasonable price
2. high efficiency and performance;Â
3. high quality
Application
This series of pumps are used for pumping air in sealed vessels. It can be used alone, also can be used as the forepump, diffusion pump, and molecular pump.
Â
| Model | speed of exhaust  |
Ultimate pressure(Pa) | Rotating Speed | suction port | Oil | Motor Power (KW) |
Dimension | WeightKg |
| XZ-1 | 1 | 6 | / | 11 | 0.15 | 0.09 | 250*150*200 | 7.5 |
| XZ-1.5 | 1.5 | 6 | / | 15 | 0.2 | 0.12 | 300*150*200 | 10 |
| 2XZ-0.25 | 0.25 | 6×10-2 | 1400 | Φ10 | 0.3  | 0.12 | 400*125*224 | 15 |
| 2XZ-0.5 | 0.5 | 6×10-2 | 1400 | Φ13 | 0.42 | 0.18 | 445*125*256 | 18 |
| 2XZ-1 | 1 | 6×10-2 | 1400 | Φ19 | 0.4  | 0.25 | 445*125*256 | 19 |
| 2XZ-2 | 2 | 6×10-2 | 1400 | Φ19 | 0.48 | 0.37 | 478*148*227 | 27 |
| 2XZ-4 | 4  | 6×10-2 | 1400 | Φ19  | 0.55 | 0.55 | 518*148*227 | 30 |
| 2XZ-8 | 8 | 6×10-2 | 1400 | Φ32 | 0.7 | 0.75 | 510*165*282 | 35 |
2XZ-1 series straight league rotary vane vacuum pump matched DZF-6020 and DZF-6021
2XZ-2/ 2XZ-4 straight league rotary vane vacuum pump matched DZF-6050 and DZF-6051
Straight league rotary vane vacuum pump
Straight league rotary vane vacuum pump is used for one of the basic equipment of pumping gas seal container. It can separate effect, also can be used as booster pump, diffusion pump, moleculat pump etc's backing pump, holding pump,titanium pump to be drainage pump to use. Can be used for electric vacuum device manufacturing, vacuum flask, vacuum welding, printing, blister, reftigeration equipment repair, and form a complete set of instruments and meters,etc. Because of small volume, light quality, and low operating sound,so more suitable for using in the lab.
1.reasonable price
2. high efficiency and performance;Â
3. high quality
Application
This series of pumps are used for pumping air in sealed vessels. It can be used alone, also can be used as the forepump, diffusion pump, and molecular pump.
Â
| Model | speed of exhaust  |
Ultimate pressure(Pa) | Rotating Speed | suction port | Oil | Motor Power (KW) |
Dimension | WeightKg |
| XZ-1 | 1 | 6 | / | 11 | 0.15 | 0.09 | 250*150*200 | 7.5 |
| XZ-1.5 | 1.5 | 6 | / | 15 | 0.2 | 0.12 | 300*150*200 | 10 |
| 2XZ-0.25 | 0.25 | 6×10-2 | 1400 | Φ10 | 0.3  | 0.12 | 400*125*224 | 15 |
| 2XZ-0.5 | 0.5 | 6×10-2 | 1400 | Φ13 | 0.42 | 0.18 | 445*125*256 | 18 |
| 2XZ-1 | 1 | 6×10-2 | 1400 | Φ19 | 0.4  | 0.25 | 445*125*256 | 19 |
| 2XZ-2 | 2 | 6×10-2 | 1400 | Φ19 | 0.48 | 0.37 | 478*148*227 | 27 |
| 2XZ-4 | 4  | 6×10-2 | 1400 | Φ19  | 0.55 | 0.55 | 518*148*227 | 30 |
| 2XZ-8 | 8 | 6×10-2 | 1400 | Φ32 | 0.7 | 0.75 | 510*165*282 | 35 |
2XZ-1 series straight league rotary vane vacuum pump matched DZF-6020 and DZF-6021
2XZ-2/ 2XZ-4 straight league rotary vane vacuum pump matched DZF-6050 and DZF-6051
NIKKO Starter: S6D95, S4D95, 6D155, S6D102, DA220, S6D105
POINTS TO ATTENTION:
1- Keep a careful check on gear ring before installation, replace one if damages.
2-Installed surface of both motor and generator should be kept clean, Make sure the strength to the bolts.
3- Clean each connection port, Strictly observed the sketch, Make sure of firm connection and tight electric conduction.
4- Check if the key could be automatic
NIKKO Starter
NIKKO Starter, NIKKO Starter Motor, NIKKO Starter Parts, NIKKO Auto Parts
NINGBO ZHONGWANG AUTO FITTINGS CO.,LTD , http://www.autostarter-alternator.com