- Model NO.: GS
- Raw Material: Pet,PVC,HDPE
- Knife Classification: Flat Knife Crusher
- Automation: Automatic
- Certification: CE
- Capacity: 300-400kg/Hr
- Transport Package: Wooden Package
- Origin: China
- Type: Hard Plastic Crusher
- Structure: Top Feed
- Knife Roll: Solid Knife Roller
- Computerized: Non-Computerized
- Blade Material: 6crsi
- Trademark: SHICA
- Specification: 1140*870*1310mm
Motor:Â 75kw/100HP
Feeding Mouth: 1200×670mm
Diameter of rotor: 670mm
Material of Knife: W18Cr4V (W- series high speed steel)
Output:Â 1000-1500kg/h
There is over-load emergency switch.
The advantage of crushing with water: rough remove sand at the first step.
Cutting Chamber: The cutting chambers are entirely made of high hardness steel (thickness: 30mm) fine ground before assembly. Long life is ensured by the use of heavy wall thickness and high grade materials that will not contaminate the material being ground. The design allows for easy disassembly, repair, and maintenance.
Knives: Knife with "V"-
According to the regulations of the State Grid, the proportion of distributed generation such as photovoltaics and wind power cannot exceed 10% of the grid, and the energy storage system must be added if it exceeds. Since photovoltaic systems and wind power systems do not use energy storage systems when they are connected to the grid for power generation, it will bring some adverse effects to the power grid. These effects become impossible to ignore. Through the analysis of the characteristics of photovoltaic power generation, it can be seen that the influence of photovoltaic power generation system on the power grid is mainly caused by the instability of photovoltaic power supply. The demand for energy storage systems has increased over the years.
The stable operation of the energy storage system is related to the safety and stability of the power grid, so the major energy storage system manufacturers attach great importance to its quality, and among the factors affecting the stability of the energy storage system, the heat dissipation performance is undoubtedly the most important. Trumony focuses on high-power heat dissipation and has rich experience in the R&D and manufacturing of heat sinks for energy storage systems. Trumony`s thermal management engineers can provide heat dissipation solutions from the beginning of the design of the energy storage system, and can also provide cooling solutions for energy storage systems. The system is optimized for thermal performance. By accumulating rich thermal design data, Trumony can provide accurate thermal simulation and thermal management test data.
snake tube for ESS,snake tube for energy storage,serpentine tube for battery pack
Trumony Aluminum Limited , https://www.szaluminumtube.com