The world's first water-coal slurry water-wall gasification industrial device came out

    Drying equipment

    China Drying Network News China Petroleum and Chemical Industry Federation organized an on-site assessment expert group at Shanxi Yangmei Fengxi Fertilizer Industry (Group) Co., Ltd. Linfen Branch, a coal gasification technology with Chinese characteristics - water coal The industrialized installation of the slurry wall cold-wall coal gasification technology conducted an on-site 72-hour assessment. According to the results of on-site assessment, the expert group confirmed that this device is the world's first water-coal-slurry water-wall gasification industrial device and has excellent comprehensive performance. It is a new type of coal gasification technology with internationally advanced level and independent intellectual property rights, and it is hoped that the relevant departments will promote the application. It supports the technology in terms of large-scale development.

    The technology was jointly developed by Tsinghua University, Beijing Yingde Qingda Technology Co., Ltd. and Yangmei Fengxi Fertilizer Industry. The single furnace processes 600 tons of raw coal and the gasifier operates at 4 MPa.

    The assessment expert group stated that this assessment adopted Yangquan anthracite coal and Shenmu coal blended coal, basically in accordance with the design coal type; the device continuously and stably operated for 72 hours, the average load rate was 103.4%, and the assessment data reached the index requirements; High, safe and reliable, with good handling performance; adopting patented technology with independent intellectual property rights, the localization rate of gasification system equipment reaches 100%; the ash melting point of coal for gasification can reach 1500°C or more, and the coal has wide adaptability; The diameter of the water-wall gasifier is 1.6 times larger than that of the gasifier with the original refractory brick structure. The water-wall coal-water slurry wall gasification process is simple and energy-saving and environmentally friendly.

    According to experts, the technological innovation of the device is mainly compared with the existing water and coal slurry gasification technologies at home and abroad. The water wall adopts a vertically suspended membrane-type wall structure, and the hydraulic circulation system adopts an intrinsically safe natural circulation design, through which The circulation operation ensures the safety of the water wall and avoids the complicated thermal expansion treatment. The water cooling structure of the process burner adopts an integral jacket type, which has a large cooling area and a good cooling effect. The burner cooling and the water wall share one set of heat. The water circulation system not only simplifies the cooling water process, but also reduces the thermal stress of the burner. The service life of the burner is more than 140 days. The coal water slurry feed uses a unique ignition technology, and the gasifier starts quickly, from cold driving to It takes only 3 hours to run at full capacity, which saves driving costs.

    The device was successfully fed on August 22, 2011. By July 31, 2012, the gasifier had operated for 279 days (the longest continuous operation for 140 days). The rest of the time was planned maintenance, and there was no passive parking phenomenon.

    Hot and cold tape materials cutting machine

    Flying Man automatic hot and cold roll to sheet cutting machine is suitable for Webbing cutting, Belt cutting, Elastic Belt cutting, Zipper cutting, Velcro cutting, Nylon Webbing cutting, Ribbon cutting, Backpack belt cutting, etc.

    Application Of Fmhz 100r

    This hot and cold cutting machine adopts imported heating tube, heating speed is fast, temperature is stable, no burnout, no deformation, no burr incision and no burr.

    This webbing cutting machine adopts imported cutting tools, sharp wear-resisting, durable, smooth and beautiful incision, microcomputer controlled, easy to operate.

    Fmhz 100r Details 2

    If you have special materials or materials that are not described, you can get in touch with our company and send the materials to test.

    Nylon Webbing Cutter,Ribbon Cutting Machine,Fabric Strip Cutting Machine,Hot And Cold Cutting Machine

    Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.zjflyingman.com

    Previous Post: PSA fire line substitutions for the second SAIC-GM-Wuling?
    Next Post: The price difference between ortho and para-nitrochlorobenzene has reached a new high since 2011
    Home
    Recent Posts
    • 260,000 tons/year acrylonitrile project opened i…
    • Domestic machine tools are popular
    • Electromechanical Valve Integration Promotes Val…
    • Garbage truck solution to some minor problems
    • Analyze the Function of Relay Protection on Powe…
    • Dongfeng New Business Segment wants to layout in…
    • More than 90% of the core components of the &quo…
    • Using the most advanced deep drilling rig techno…
    • Fault reason and solution of hot water circulati…
    • D1X1.5m Ship Use Yokohama Type Pneumatic Rubber …
    • Plastic Bottle Heat Seal and Tire Seal for Elect…
    • ·Fujian local standard "General Technical …
    • Effects of Different Rice Coverage on Soil Tempe…
    • Analysis of Precautions for Use of Intelligent P…
    • Portable and Handheld Explosive and Bomb Trace D…
    • Customized Electronic Products Hardware Accessor…
    • 36 Head Computerized High Speed Quilting and Emb…
    • Shimadzu launches energy dispersive X-ray fluore…
    • The lake machine branch GX005 sawing and milling…
    • China's energy technology development strate…