The world's largest full LED lighting plant factory in Japan

    Japan's Mirai Company (Headquarters: Tokyo) has built an artificial light plant factory that uses all LEDs for lighting in the city of Taga, Miyagi Prefecture. According to the company, this is the world's largest plant factory that uses LED lighting. It can produce 10,000 lettuce per day. Mirai transformed the existing building in the Miyagi Futuristic Industrial Park at the Sony Sendai Technology Center into a plant factory. As one of the funded businesses of the Tohoku Economic and Industrial Bureau of the Ministry of Economy, Trade and Industry, Mirai has conducted an empirical experiment with GE Japan on the theme of development of cultivation environment technology and development of LED lighting suitable for plant factories. The design, construction and cultivation of the entire plant are under the responsibility of the Kashima Construction Company of Japan. The biggest feature of the plant is the use of GE's LED lighting for plant factories in Japan, which uses a technology that evenly disperses highly directional LED light and illuminates different wavelengths of light depending on the growth stage of the plant. For example, in the early stages after exiting the nursery, light white light mixed with white and red LED light sources is illuminated to promote photosynthesis. The reddish light from the LED illumination with the red-blue LED source is then illuminated to promote the growth of the leaves and rhizomes. Near the harvest, white light is again illuminated to promote photosynthesis. With this method, not only is the power consumption reduced by 40, but the same area is increased by 50 compared with when only fluorescent lamps are used. In addition, Mirai did not disclose specific techniques related to the wavelength of LED illumination light. In order to use buildings with a ceiling of up to 7m, a 15-layer cultivation frame of 6m height was developed. Not only the lighting fixture and the nutrient solution circulation system are integrated and the function is improved, but also the cost is reduced by using measures such as general-purpose cultivation frame members. In addition, Kashima Construction has also introduced the cultivation environment simulation technology, using the technology that the company has cultivated in the plant factory construction process. According to the company's introduction, in order to avoid significant differences in the temperature, air volume and illuminance of the multi-layer cultivation frame in the height direction, this calculation was repeated and the layout of the air conditioner and equipment was designed. Through the use of LED lighting and 15-layer cultivation racks, the yield per unit area has been increased, and the benefits of plant factories have been improved. According to Mirai, the current retail price of lettuce is about 200 yen. Although the company did not disclose the wholesale price, it said that vanilla and other aspects are not much different from open-air cultivation, and sometimes even cheaper plant plants are cultivated. The average price of lettuce, etc. is higher than that of open-air cultivation, but when the price of open-air lettuce rises, the two will be basically the same (Mirai stands for Director of the Board of Directors, Maji, Shimamura). At present, the plant is planting six kinds of leafy vegetables such as erect lettuce, chicory, lettuce, lettuce and cress, and the time from sowing to harvesting is 33 to 35 days. The plant was commissioned in early May 2014 and will be available on June 20. The cultivated vegetables have begun to be sold in local supermarkets. The plant will be officially put into operation in the summer of 2014, with annual sales targets of hundreds of millions of yen. Companies such as Mirai also intend to use the technology experience gained to export plant factories.

    Pressure Vessel Steel Plate

    Pressure Vessel Steel Plate refers to the carbon steel and low alloy steel plates used to manufacture pressure vessel shells.

    Pressure Vessel Steel Plate,Pressure Vessel Steel Grades,Boiler Steel Plate,Pressure Vessel Quality Steel

    Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.rizhaoxinsteel.com

    Previous Post: The Difference of Seed Clarity Between the New and Old Rules of Seed Clarity Observatory
    Next Post: Brake Lining for Heavy Duty Truck Non Asbestos (19365/19366)
    Home
    Recent Posts
    • Quantitative air flow spore catcher gains quanti…
    • The annual inspection mark has to be so posted~ …
    • Structural design of a wet gas storage tank
    • Research on vacuum diffusion welding process of …
    • Promote the straw (grass) compression equipment …
    • Shanghai Shipyard Environmental Protection Co., …
    • GTT Technology Receives FSRU Support Order from …
    • Dongfeng Refrigerated Vehicle - Refrigerated Veh…
    • The Scania Hager Premium Passenger Car with Over…
    • The 8th Smart Water Conference convenes to launc…
    • High Precision Shot Blasting Machine Spare Parts…
    • Sichuan Chengdu Chemical Production Enables Eart…
    • What are the national policies for the parts and…
    • Ship anti-fouling coating independently research…
    • The market scale of 20 billion nurtures the unde…
    • Ultra-precision aspherical surface CNC grinding …
    • Electronic platform scale from precision
    • The misunderstanding of CNC cutting machine
    • Slotted Round Nuts for Hok Spanner, ISO Metric F…
    • The luxury car broke through the guardrail in th…