Chain Hoist / Manual Hoist

H-Lift CHC Type Manual Chain Hoist / Chain Pulley Block: The H-Lift CHC series manual chain hoists are robust and reliable lifting solutions designed for heavy-duty industrial applications. These hoists are ideal for use in warehouses, construction sites, and manufacturing facilities where durability and precision are essential. With capacities ranging from 0.5 tons to 20 tons, they offer flexibility for a wide range of lifting needs. Key Features: 1. **All-Steel Construction**: Ensures long-lasting performance and resistance to wear and tear. 2. **Ball Bearing Components**: Reduce friction and increase lifting efficiency by using roller or ball bearings on all rotating parts. 3. **Automatic Load Brake**: Equipped with asbestos-free friction discs for safe and reliable braking. 4. **Enclosed Housing**: Made of stamped steel, allowing for both indoor and outdoor usage. 5. **Drop-Forged Hooks**: Designed to yield under overload rather than break, made from high-tensile, non-ageing steel. Each hook is fitted with a safety latch and can rotate 360 degrees. 6. **Two-Stage Gear Reduction**: Hardened gears and pinions supported by roller bearings improve efficiency and longevity. 7. **Precision-Machined Sheave**: Features four chain pockets and roller bearings for smooth operation and reduced wear. 8. **Hand Chain Guide System**: Includes slots and cover to keep the hand chain aligned and prevent damage. 9. **Available Chains**: G-80 zinc-plated RUD chain from Germany or FEC chain from Japan upon request. 10. **Overload Protection**: Optional device available for added safety and can be installed later without issues. 11. **Factory Tested**: Each unit is tested with overload and comes with a test certificate, serial number, and EC conformity declaration. Applications: H-Lift chain hoists, also known as chain blocks, are used for lifting and lowering loads manually. They are available in single or double fall configurations based on the model and capacity. Specifications Table: | Model | CHC005 | CHC010 | CHC015 | CHC020 | CHC020D | CHC030 | CHC050 | CHC100 | CHC200 | |------------|--------|--------|--------|--------|---------|--------|--------|--------|--------| | Capacity (ton) | 0.5 | 1 | 1.5 | 2 | 2 | 3 | 5 | 10 | 20 | | Standard Lift (m) | 2.5 | 2.5 | 2.5 | 3 | 3 | 3 | 3 | 3 | 3 | | Running Test Load (kN) | 7.5 | 15 | 22.5 | 30 | 30 | 45 | 75 | 150 | 250 | | Effort Required (N) | 221 | 304 | 343 | 410 | 314 | 343 | 414 | 414 | 828 | | Headroom (Hmin mm) | 255 | 306 | 368 | 368 | 444 | 486 | 616 | 750 | 1000 | | Number of Chain Strands | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 4 | 8 | | Load Chain Diameter (mm) | 6 | 6 | 8 | 8 | 6 | 8 | 10 | 10 | 10 | | Hook Opening (mm) | 30 | 34 | 38 | 41 | 41 | 48 | 52 | 64 | 85 | | Dimensions (mm): A | 113 | 126 | 141 | 141 | 126 | 141 | 163 | 163 | 191 | | B | 125 | 147 | 183 | 183 | 147 | 183 | 215 | 404.5 | 595 | | C | 255 | 306 | 368 | 368 | 444 | 486 | 616 | 750 | 1000 | | Net Weight (kg) | 8.5 | 11 | 18 | 18 | 15 | 27 | 42 | 83 | 193 | | Extra Weight per Meter (kg) | 1.7 | 1.7 | 2.3 | 2.3 | 2.5 | 3.7 | 5.3 | 9.7 | 19.4 | These hoists are manufactured in Zhejiang, China, and comply with CE standards. The HS Code is 8425190000. Customization options such as OEM branding and special chains are available. The H-Lift brand is known for its quality, reliability, and compliance with international safety regulations.

IGBT Heatsink

IGBT Heatsink is a type of heat sink that is designed specifically for Insulated Gate Bipolar Transistors (IGBTs). IGBTs are widely used in power electronics applications due to their high switching speed and ability to handle high currents and voltages. However, they generate a significant amount of heat during operation, which can cause them to fail if not properly cooled.IGBT Heatsinks are designed to dissipate the heat generated by IGBTs and maintain their operating temperature within safe limits. They are typically made of aluminum or copper and consist of fins or other structures that increase the surface area for heat transfer. The fins are usually arranged in a way that maximizes the airflow over the heatsink, either by natural convection or forced air cooling.IGBT Heatsinks come in various sizes and shapes to fit different IGBT modules and applications. They can be customized to meet specific thermal requirements and can be mounted on the IGBT module using screws, clips, or other fastening methods. Some IGBT Heatsinks also come with thermal interface materials such as thermal pads or grease to improve the thermal contact between the IGBT and the heatsink.In summary, IGBT Heatsinks are essential components in power electronics systems that use IGBTs. They play a critical role in maintaining the reliability and performance of IGBTs by dissipating the heat generated during operation.

Igbt Heatsink,Heatsink Aluminum,Heatsink Extrusion,Aluminum Igbt Heatsink

Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com