Electrical Copper Wire Scrap Granulating Machine

Electrical Copper Wire Scrap Granulating Machine


 99% Separate Rate Copper Wire Scrap Granulating Machine

The detailed introduction of copper wire scrap granulating machine

copper wire scrap granulating machine has dry type structure, main used to all kinds of waste copper line will be separated into tiny copper rice and PVC, the applicable range of Φ waste line diameter of 0.3 mm to 20 mm, automobile electrical route or car bottom line, motorcycle electric line, computer case line and communication cable, etc. After crushing processing and shock treatment, screen separation copper and PVC will be sorting out.

 

 

1. The electrical copper wire scrap granulating machine is used for recycling waste and scrap copper wire and cables to getting the clear copper granular and plastic finally.

 

 

 

2. The material of the waste wire can be telephone wire, household electric wire, automotive wire, and cables, which diameter should be within 25mm.

 

 

 

3. This electrical copper wire scrap granulating machine need no water during the processing only put the waste wire into the feeding mouth, the copper and plastic will be separated by vibrating. The copper purity is 99%.

 

 

 

4. This electrical scrap copper wire scrap granulating machine is overall combination, just need 1-2 workers to operate, and it take a small area.

 

 

5. Our electrical copper wire scrap granulating machine is a kind of equipment that is used to crush waste wires and separate the copper wire from plastic. The separated coppers are just like grains of rice. Our machine belongs to environmental protection machinery!

 

 

6. The structure of the device is easy to install, debugging and transport, having good stability and high yield!

 

The full automatic copper wire scrap granulating machine parameter

Electrical Copper Wire Scrap Granulating Machine


 99% Separate Rate Copper Wire Scrap Granulating Machine

The detailed introduction of copper wire scrap granulating machine

copper wire scrap granulating machine has dry type structure, main used to all kinds of waste copper line will be separated into tiny copper rice and PVC, the applicable range of Φ waste line diameter of 0.3 mm to 20 mm, automobile electrical route or car bottom line, motorcycle electric line, computer case line and communication cable, etc. After crushing processing and shock treatment, screen separation copper and PVC will be sorting out.

 

 

1. The electrical copper wire scrap granulating machine is used for recycling waste and scrap copper wire and cables to getting the clear copper granular and plastic finally.

 

 

 

2. The material of the waste wire can be telephone wire, household electric wire, automotive wire, and cables, which diameter should be within 25mm.

 

 

 

3. This electrical copper wire scrap granulating machine need no water during the processing only put the waste wire into the feeding mouth, the copper and plastic will be separated by vibrating. The copper purity is 99%.

 

 

 

4. This electrical scrap copper wire scrap granulating machine is overall combination, just need 1-2 workers to operate, and it take a small area.

 

 

5. Our electrical copper wire scrap granulating machine is a kind of equipment that is used to crush waste wires and separate the copper wire from plastic. The separated coppers are just like grains of rice. Our machine belongs to environmental protection machinery!

 

 

6. The structure of the device is easy to install, debugging and transport, having good stability and high yield!

 

The full automatic copper wire scrap granulating machine parameter

C-type Injection Machine

C-type Injection Machine,Ac Plug Plastic Injection Machine,Plastic Injection Machine

Fenghua Jade Motor Co., Ltd. , http://www.haifly-injection-machinery.com