GF type mechanical agitating flotation machine

    The flotation machine is the development of the North Mining Institute, the production of coarse particles flotation machine for sorting colored, black, precious metals and non-metallic minerals small and medium enterprises, the particle size range of material handled as 0.074mm accounted for 45 %~98%, pulp concentration <45%. Its characteristics are: 1 self-priming air, self-priming air volume up to 1.2m 3 /m 2 •min; 2 self-priming slurry, self-priming from the outside to the mine and foam in the mine, flotation machine operation room can be flat configuration The slurry in the 3 tank is well circulated, the liquid level is stable, the slurry in the tank has no rotation phenomenon, and there is no turning; 4 sorting efficiency is high, and the recovery rate of coarse and fine minerals is improved; 5 low power consumption, similar to the same specification The flotation machine saves 15%~20% of power consumption, and at the same time can inhale a sufficient amount of air and pulp; 6 the wearing parts have a long service life, especially the life of the impeller and stator is more than doubled compared with similar flotation machines.
    The GF type flotation machine is shown in Fig. 1, the technical parameters are listed in Table 1, and the external dimensions are shown in Fig. 2 and Table 2.
        figure 1   figure 2   Table 1   Table 2

    Shine normal roller Veneer Dryer includes 20-60m and 1-3 deck,also we can design special models according to customer's special requirements.The veneer dryer produced by  Shine Machinery  is  widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer. Shine 2 deck roller veneer drying equipment is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel.  and can quickly achieve the heat required by the veneer dryer.

    2 Deck Veneer Dryer

    Applying Wood Veneer,2 Deck Veneer Dryer,Double Deck Veneer Dryer,Veneer Dryers Machine

    Shandong Shine Machinery Co.,Ltd , https://www.shinewoodmachine.com

    Previous Post: Main technical and economic indicators of alumina
    Next Post: Principle process and process for recovering copper by acid leaching-extraction-electrowinning method
    Home
    Recent Posts
    • New technology and new technology of iron ore el…
    • Study on a small hematite beneficiation process …
    • Comprehensive development and application of dol…
    • Research technology of cyanide-free separation p…
    • Wollastonite mining
    • Other mill
    • Summary of recovery of manganese from tungsten s…
    • Elements made from fluorite
    • Jiapigou Gold Mine Concentrator
    • Donganshan Iron Ore Concentrator (3)
    • Etching characteristics of altered granite-type …
    • Overview of the Jing Tieshan Iron Deposit in Gan…
    • Production scheduling management system - genera…
    • Flotation technology observation bubble judgment…
    • Semmex Henderson Molybdenum Ore Selection Plant
    • Tin furnace slag recovery
    • What is the genetic type of the deposit?
    • Leaching kinetics of finely ground materials
    • What is loss, ore loss rate, and how is it calcu…
    • List of different production scale molybdenum pl…