After using the low temperature refrigerator for a long time, users need to pay attention to the maintenance work of various components, especially the scale problem of the shell-and-tube condenser. If it is not solved in time, these scales will affect the low-temperature heat dissipation problem of the low-temperature refrigerator, so the low-temperature refrigerator Ultra-low temperature shell-and-tube condensers require timely removal of scale.
Low-temperature refrigerator ultra-low temperature condenser scale removal In general, we have three methods, namely mechanical descaling, chemical pickling and descaling, and electronic magnetic water separator descaling. Low-temperature refrigerator ultra-low temperature mechanical descaling is the use of soft shaft washing tube The method for descaling the condenser of the cooling pipe is particularly suitable for a vertical shell and tube condenser. The specific operation is to first withdraw the refrigerant in the condenser, and then close all the valves connected to the refrigeration system of the condenser to ensure the normal supply of the cooling water of the condenser, and then condense in the shape of the umbrella gear connected by the soft shaft washer. The vertical riser of the device is rotated and descaled from top to bottom, and the circulating cooling water is used to cool the heat generated by the friction with the pipe wall, and the removed scale, rust and the like are flushed into the pool. Low-temperature refrigerator ultra-low temperature shell-and-tube condensers need to pay attention to prevent damage to the pipe wall during cleaning, to avoid the failure of low temperature refrigerators.
Followed by the chemical pickling and descaling method, the low-temperature condenser of the low-temperature refrigerator is cleaned by using the prepared weakly acidic descaling agent to remove the scale and improve the heat transfer efficiency of the condenser. First, the descaling is prepared in the pickling tank. Solution, start the pickling pump, so that the detergent solution is circulated in the condenser tube for 24 hours, after which the scale is basically removed after 24 hours, then stop the pickling pump work, then use a round steel brush Pull the brush back and forth in the pipe wall of the condenser pipe, rinse the scale and rust with clean water, and then repeatedly clean the detergent solution remaining in the pipe with clean water until it is thoroughly clean. The chemical pickling and descaling method is suitable for vertical and lying. Shell and tube condenser.
How to remove the scale of the shell-and-tube condenser in the ultra-low temperature of the low-temperature refrigerator In addition to the above-mentioned method 2 , there is an electronic magnetic water descaling method to treat the calcium, magnesium and other salts in the cooling water flowing through the condenser in a positive and negative ion state at normal temperature. Dissolved in water, can effectively prevent the formation of new scale, but also can remove the original scale, and because the expansion coefficient of the steel pipe and scale in the condenser is different, the original scale gradually cracks, and the magnetized water is uninterrupted. The ground invades its cracks, destroying the adhesion of the original scale, making it gradually loose and falling off on its own and continuously taken away by the circulating cooling water.
Once the low-temperature condenser of the low-temperature refrigerator has scale, the thermal resistance will continue to increase, resulting in a continuous decrease in the heat transfer coefficient, which makes the refrigeration effect worse and worse. Therefore, once the condenser is found to have scale, it must be checked in time. Remove scale.
Auto Control Arm is divided into front swing arm and lower swing arm. The Front Control Arm is the guide and support of suspension. Its deformation affects the wheel alignment and reduces the driving stability. The main function of the Lower Control Arm is to support the body, shock absorption and buffer the vibration in driving. The reducer can play a good auxiliary role in the lower suspension arm, and its tacit cooperation with shock absorption and spring can form an excellent suspension system (assembly).
Lower Suspension Control Arm,Lower Control Arm Replacement,Lower Control Arm Adjustment,Lower Control Arm Car
Saga Trading (Zhoushan) Co., Ltd. , https://www.sagatd.com