Both excavators are equipped with specialized oil bath air filters, which can effectively filter dust and other impurities in the air, prevent a large amount of dust from blocking the paper filter elements, extend the replacement cycle of the paper filter elements, and achieve better filtration. The effect is more suitable for deserts, mines and other dusty and harsh environments. The oil bath type air filter uses the viscosity of the oil to adsorb the dust in the air. In addition, the XE470 CK also comes with a reinforced chassis and a heavy-duty rock bucket, which greatly improves the durability and reliability of the machine. (This article is from Xu Gong Feng Xiaolan Liu Chengliang)
Brass has excellent CNC Machining Turning performance, high-speed machining turning under the brass can get excellent surface finish. Our technical team has very good experience in machining brass, machining brass including brass plate, brass rod, brass tube. Brass hardware parts has high strength, good plasticity in hot state, good plasticity in cold state, good machinability, easy welding and good corrosion resistance. Brass parts are very durable. It is electrically conductive and does not usually corrode or deteriorate over time. Thus brass is often used to produce products with longer service life. Machining brass parts Widely used: pipes, radiators, ship parts.
Machining Brass, Brass Machined Parts, Perfessional Brass Parts Machining, Machining Brass Conponents, Brass Parts Machining
Hong Kong RYH CO., LTD , https://www.longfeikitchenware.com