Advantages of  HUAJU Machinery ^™ extruders
 co-rotating parallel twin-screw extrusion & Research and development of extended devices





Very high quality of the end product because only a minimum iV degradation occurs during processing
and the crystal clear material does not become yellowish High flexibility because recipes
and colors can be changed very quickly due to the good self-cleaning behavior of the twin screw extruder
Much simpler logistics because pelletized new product and different regenerates
(ground product, agglomerates, flakes)

can be processed together even if they have different iV values Energy and time savings as the pre-drying
and crystallization are omitted in the single-stage production process.



TYPICAL AREAS OF APPLICATION FOR PROCESSING OF PET Flake 
HUAJU Machinery ™  has developed a technology for the processing and direct extrusion of PET
in which neither pre-drying of the materials nor crystallization and agglomeration of recyclates
are necessary in comparison with conventional PET processing techniques.

It enables the production of semi-finished products in one process step.
HUAJU Machinery ™ designs complete recycling systems.

With our many years of experience we ensure smoothly interacting process steps from material handling to feeding,
twin screw extrusion and cooling of the product. Our plants ensure maximum productivity and efficiency.





Applications & Features Of  The roots vacuum pump

1.Low noise.
2.Overflow valve for preventing thermal overloading.
3.High pumping speed in the wide pressure rang.
4.Gas protection device for evacuating high-boiling working media.
5.Checking is convenient.
6.Insensitive to the dust and water vapour contained.
7.Low drive power.
8.They find wide application in the fields of metallurg, chemical, textile and electronics industries.

 

COREMA^®

Recycling and compounding in a single step

A powerful, energy and time-saving innovation from EREMA: COREMA combines the benefits of recycling
and compounding in a single plant.
This system produces tailor-made tunable recycling compounds for especially high quality applications.

Recycling raw materials such as PP fleece, PE edge trim, PA fibres are transformed into a filtered melt using proven,
robust EREMA technology which is then fed directly to the HUAJU Machinery ™  co-rotating twin screw extruder.

With its excellent mixing and gas removal properties, this part of the system can handle all compounding tasks.
Besides the dosing of a wide variety of additives, high amounts of fillers and reinforcing agents can be admixed.

Advanced High Torque Gearbox
ODM Design & Manufacture Acceptable

More than ten years experience in design and manufacture of gearbox,
The bearing capacity is up to 30% above the traditional configuration,
the radial bearings prolonged up to 20 thousand hours.
Each gearbox has been tested at least 24 hours running to ensure stable and reliable quality.
Range of output rotation:300-800rpm,suitable for screw diameter:18-132mm
Torque level: T/A3≈9-11N•m/cm3;
There are hundreds of our company's gear box on which running all kinds of extrusion line to create value for 
customer all over the world.





Service system

Before sale services
Introduce products and applications in detail
According to processing materials and formula, offer a suitable quotation.
Offer lab for test

Manufacturing
Provide layout and engineering conditions
Inform the project processing status
In order to ensure product quality and delivery on time ,Production according to documents strictly
 
After-sale service
Provide installation ,commissioning & training
Provide long-term technical services for free




 

Industrial 3D Printer

Industrial 3D Printer,3D Printed Sand Sculpture,Rapid Manufacturing 3D Printer,Rapid 3D Sand Printing

Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzlprinter.com