The motor copper wire granulator is designed for efficient recycling of scrap copper wires and cables, including automobile, communication, and other types of copper wires. It helps recover valuable copper by separating it from the plastic sheath. The system consists of a crusher, material channel, vibrating separator, air blower, dust collector, and underbed.
Motor Copper Wire Granulator Application:Â
This machine is ideal for crushing and separating copper cables. It is suitable for processing copper wires with diameters ranging from 0.3 to 20 mm.
Applicable Copper Wires:Â
 
Motor Copper Wire Granulator Processing Procedures:
- Wires and cables are fed into the crusher, where they are broken down and separated into copper and plastic. The size of the crushed material depends on the mesh size of the sieve—larger mesh results in longer pieces and higher output. Mesh size should be selected based on the type of material being processed.
- The mixed material (copper granules and plastic pieces) is transported to the separator via a conveyor. During this process, dust and lightweight plastics (such as fibers, ropes, or tapes) are collected by the pressure-reducing blower. The blower is connected to a dust collector that uses a dust bag to prevent environmental pollution. Dust and some lightweight plastics are collected in the bag and discharged when full.
- The vibrating separator separates plastic and copper granules based on their physical properties and specific gravity. By adjusting the conveying speed and amplitude, copper granules (with higher specific gravity) move to the bottom, while lighter plastic pieces move to the top. They are then discharged through separate outlets.
- All components are mounted on the underbed, forming a complete structure. The machine is pre-adjusted before shipping, so the customer only needs to connect it to the power supply.
| Model | Recycling Capacity | Processed Wire Dia. | Total Power | Voltage | Dimension | Weight |
| QJF-400-1 | 80-100kg/h | Â Â 0.3-20mm |
11.92KW | Â Â Adjustable |
1.5*1.5*1.9m | 750kg |
| QJF-400 | 200-300kg/h | 23.12KW | 2.7*1.9*2.3m | 1200kg | ||
| QJF-600A | 300-400kg/h | 48.36KW | 4*1.85*2.4m | 3400kg | ||
| QJF-600 | 300-400kg/h | 52.36KW | 4.3*1.95*2.4m | 3400kg | ||
| QJF-800 | 600-700kg/h | 0.1-40mm | 75.4KW | 9.1*2.3*3.54m | 8000kg |
Motor Copper Wire Granulator Different Models:Â Â
FAQÂ
 1. Is there quick-wear part on the machine?Â
The spare parts of the machine are blades and screens, which have a service life of over two years. We also provide blade sharpening machines for maintenance.
2. What's the longest continuous working time for the recycling machine?  Â
Normally 10 hours per day.Â
3. Is the machine easy to operate? How many workers required to operate it?Â
We design a precise but simple control system for the machine.
For a single recycling machine, only one worker is needed.
For a complete recycling line, two workers are required.
Contact Information:Â Â
Attn: Tina GeÂ
Mobile: +86 159 8192 5357Â
Â
Â
Release agent is a functional substance between mold and finished product. Release agent has chemical resistance, in contact with the chemical composition of different resins will not be dissolved. Due to the rapid development of injection molding, extrusion, calendering, molding, laminating and other processes, the dosage of release agent is also greatly increased. Our release agent variety, complete specifications, quality assurance!
Release agent is widely used in metal die casting, polyurethane foam and elastomer, glass fiber reinforced plastics, injection thermoplastics, vacuum foam sheet and extruded profiles and other die pressing operations. Sometimes other plastic fillers such as plasticizers leak into the interface during molding, and a surface remover is needed to remove it.
Mould releasing agent,Mold Release,Stripper wax,Mold Release Price
Jiangyin Thousands Chemicals Co. , https://www.wqhxcomposite.com