Application and difference of talc and calcium carbonate

    1, talc and calcium carbonate are used as fillers, the purpose are: 1, increase the dimensional stability (i.e. shrinkage decrease); 2, increase the stiffness of the material; 3, increasing the heat resistance of materials; 4 , reduce material costs and other aspects; but also have its drawbacks: 1, increased density; 2, poor use, impact toughness decreased; 3, material gloss has decreased.
    2, talcum powder and calcium carbonate have the same granularity, generally 300 mesh, 600 mesh, 800 mesh, 1250 mesh and 2500 mesh, of course, there are finer, and generally used in plastic can choose 800 mesh and 1250 Look at these two, this can make the performance / price ratio the highest.
    3, the price of talcum powder has fluctuated, in general, according to the number of orders to determine the price will not have much problem, such as: 800 mesh general price is between 700 to 850 yuan, 1250 is also in the 1000 to Between 1280 yuan. It is not normal if the price is too high or too low.
    About the difference between talc and calcium carbonate:
    1. The shape of talc powder is flake-shaped, so it has higher rigidity, dimensional stability and heat-resistant temperature, and the reinforcing effect is good.
    2, calcium carbonate is generally granular, so its rigidity and other aspects are not as good as talcum powder, but its price is lower, and whiteness is high, while the impact on plastic impact toughness is small.
    3. Talc has a nucleating effect on polypropylene, and calcium carbonate has no obvious effect in this respect.
    4, calcium carbonate can be generally divided into light calcium carbonate and heavy calcium carbonate, and talc powder does not have this distinction, talcum powder is ground from natural minerals.

    Corrugated Sheet

    Corrugated board is also called the pressure plate, the color coating steel plate, galvanized sheet and other metal plate by rolling cold bending into a variety of wave type of pressure plate, it is suitable for industrial and civil buildings, warehouses, special buildings, large span steel structure of the roof, wall and external wall decoration. With light weight, high strength, rich color, convenient construction, earthquake, fire, rain, long life, maintenance free characteristics, has been widely used.

    Corrugated Sheet,Corrugated Tin Sheets,Galvanized Tin Sheets,Galvanized Corrugated Sheet

    Shandong Panhua Metal Material Co. LTD , https://www.panhuametal.com

    Previous Post: Mesh belt conveyor introduction
    Next Post: 2000T/d magnetite ore dressing plant engineering process equipment table
    Home
    Recent Posts
    • · Wanda Baotong more than 10,000 tires were rec…
    • Technical and economic analysis of uranium resou…
    • Mesh belt conveyor introduction
    • Application and difference of talc and calcium c…
    • 2000T/d magnetite ore dressing plant engineering…
    • Mechanism of action of anion collector and non-s…
    • Study on flotation new technology of skarn type …
    • Experimental study and production practice of cy…
    • Research report on ore dressing test of a certai…
    • Chlorine gas selectively leaching strontium sulf…
    • Research on the Method of Maintaining Commonly U…
    • Heavy medium vibration chute
    • Breeding of refractory gold ore pre-oxidized hig…
    • Basic principles of equipment configuration in m…
    • Non-ferrous metal ore mining and mining method
    • SAIC Commercial Vehicle Marketing Business Confe…
    • Brake Pad 3411163307 for BMW
    • Analysis of iron ore beneficiation technology
    • Rare earth process production flow chart
    • Production of molybdenum powder