Application of Shaftless Screw Conveyor in Ceramic Production Line

1. Product introduction:

The shaftless screw conveyor is an alternative to the shaft conveyor. The spiral body is a shaftless screw. It has the advantages of high working efficiency, simple maintenance, less pollution, and less noise. Not only can it transport light, soft, small, strips of floating material that older equipment can't transport, but it also separates the sand and presses the dirt. Beautiful appearance, reasonable structure.

2. Product working principle:

The working principle is the same as that of the shaft screw conveyor, and the material is propelled forward by the rotation of the blade. The performance characteristics of the shaftless screw conveyor are: compared with the traditional shaft screw conveyor, the shaftless screw conveyor has the above outstanding advantages due to the use of a non-central shaft design and the use of an integral steel screw pushing material with certain flexibility. Good environmental performance. Compared with the shaft screw conveyor, the weight and cost will be reduced.

3. Product performance characteristics:

The shaftless screw conveyer can convey the material that the traditional shaft screw conveyer and belt conveyer cannot or cannot convey easily, such as granular and powder materials, wet and paste material, semi-fluid and viscous material, easy to wind and clog. Materials, materials with special hygiene requirements.

1) Good environmental performance. The use of a fully enclosed and easy-to-clean spiral surface ensures that the delivered material is not contaminated and does not leak the conveyed material.

2) The conveying volume is large and the conveying volume is 1.5 times that of the shaft conveyor with the same diameter.

3) Large torque, low energy consumption, no discharge of the discharge port.

4) Long transport distance, single machine transmission length up to 60 ~ 70m.

5) Compact structure, space-saving, beautiful appearance, easy operation, economical and durable.

4. The structure of the product:

The shaftless screw conveyor mainly consists of a driving device, a head assembly, a housing, a shaftless screw body, a tank body liner, a feed inlet, a discharge port, a cover (when required), a base, and the like.

Driving device: Cycloid pin wheel reducer or shaft-mounted hardened gear reducer. The design should be as far as possible to set the drive device at the discharge end so that the spiral body is under tension when it is running.

The head is equipped with a thrust bearing that can withstand the axial forces generated when conveying the material.

Enclosure: The enclosure is U-shaped or O-shaped, and the upper is equipped with a rain-proof cover. The material is stainless steel or carbon steel or glass steel.

Shaftless spiral: made of stainless steel or carbon steel.

Slot lining: Made of wear-resistant plastic or rubber or cast stone.

Inlet and outlet ports: There are two types: square and round. The general inlet and outlet ports are determined by the user.