Chrome Layer Thickness: 15Î¼m ~ 25Î¼m ( Customized)
Roughness: Ra 0.2Î¼m~0.4Î¼m
Axis Straightness: 0.15mm/1000mm
Surface Hardness: HRC58-60
Surface Hardning Depth: 0.8-3mm
Transport Package: Paper Sleeve and Wooden Box
Specification: dia 30mm
HS Code: 8483109000Company overview
Suzhou Weipeng Precision Machinery Co., Ltd.Â is located in Suzhou, which is aÂ foreign trade oriented economic developed city, adjacent to international port city Shanghai. Established in 2009, we're aÂ manufacturing company specialized in the production of piston rods and linear shafts.
Â Â Â Â Â QualityÂ Â isÂ Â LifeÂ Â ofÂ Â Enterprise. YourÂ Â SatisfactionÂ Â isÂ Â OurÂ Â Goal.Â Â Â Â Â Â Â
We offer the manufacturers of hydraulic and pneumatic cylinders a wide assortment of high quality tube and piston products.
Hard Chrome Plated Rod, Hydraulic Piston Rod, Cylinder Piston Rod,Â Chromium Rods, Hard Chrome Shaft,Â Induction Rod, Induction Shaft, etc.
Material: JIS S45C, SAE1045, DIN CK45
The hard chromium piston rods produced by our company come with more than JIS S45C material, where the rods first undergo precision milling and processing, and are then put through gard surface chromium treatment, allowing a surface precision level of f7, and a surface hardness reaching HV800 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.
The corrosion resistances is tested in our own internal salt spray laboratory, andÂ The rods surface heat treatment and hardness reaching HRC55Â°Â±2Â°,Â and at a hardened depth of between 0.5mm - 3mm, before the rods are put through precision milling and hard chromium treatment for a membrane thickness measuring 20 micron Â± 10% to drastically improve the rod's wear resistance, and help to extend the life cycle of the rods.
Our main product specifications are written below for your reference. Â If any interest, pls feel free to contact us.
|Â Item||HardÂ ChromeÂ PlatedÂ Rod||Induction HardÂ Chrome Rod|
|Â Place of Origin||Â Jiangsu, China||Â Â Jiangsu, China|
|Â MaterialÂ||Â JIS S45C, SAE1045, DIN CK45||Â JIS S45C, SAE1045, DIN CK45|
|Â Length||Â 1000-6000mm||Â 1000-6000mmÂ|
|Â Shaft Diameter||Â 3-120mm||Â Â 3-120mm|
|Â Surface Hardness||Â without hardened orÂ hardened||Â HRC58-60|
|Â Chrome LayerÂ Hardness||Â above HV800||Â above HV800|
|Â Chrome LayerÂ Thickness||Â 15Î¼m ~ 25Î¼m ( CUSTOMIZED)||Â Â 15Î¼m ~ 25Î¼m ( CUSTOMIZED)|
|Â Surface Hardning Depth||Â /||Â 0.8-3mm|
|Â Axis Straightness||Â 0.15mm /1000mm||Â 0.15mm /1000mm|
|Â Roughness||Â Ra 0.2Î¼m~0.4Î¼m||Â Ra 0.2Î¼m~0.6Î¼m|
|Â Precision||Â G6/F7||Â G6/F7|
Chrome Plated Steel Bars:
Our Chrome Plated Bars are produced from medium carbon cold-finished or hot rolled steel bars usually in 1045 grades. The bars are centerless ground, polished, and chrome plated to a minimum thickness of 0.0005", and 0.001" per side.Â
Chrome Plated bars are specifically designed to be used for most piston rod applications in hydraulic and pneumatic cylinders.
Induction Hardened Chrome Plated Bars:
Our Â Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on JIS S45C, SAE1045 or DIN CK45Â steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005" or 0.001" per side. The finished product results in a superior impact resistant bar ideal for high quality piston rods capable of handling tough environments.
Linear Motion Guides, Hydraulic Cylinder rods
plastic injection molding machines, construction equipment, rubber molding machines, papermaking machines, printing machines, refrigeration equipment, foods and chemical machinery, loading equipment, fiber spinning equipment, textile machinery, agricultural equipment, automotives, shipbuilding and the like.
|Â ItemÂ||Â HonedÂ Tube|
|Â RawÂ Material||Â DIN ST52, SAE1020|
|Â PressureÂ &Â TemperaturÂ Classification||Â HighÂ pressureÂ &Â temperatureÂ piping|
|Â InnerÂ Diameter||Â 40mm-320mm|
|Â OuterÂ Diameter||Â 50-400mm|
|Â Thickness||Â 5-40mm|
|Â Â Length||Â 7000mm|
|Â Straightness||Â MaxÂ 0.5/1000mm|
|Â Â InsideÂ SurfaceÂ Roughness(Ra)||Â 0.2-0.4um|
|Â ToleranceÂ INT||Â DIN2391Â H8|
Cold Drawn Seamless Mechanical Tubing (CDS)
is a cold drawn 1020 steel tube. Produced from piercing hot rolled bar stock, the cold drawing process increases the tube's physical properties reducing the cost of machine time. Cold drawn seamless tubing provides a better uniformed OD and ID, enhanced machinability, increased strength, and tighter tolerances compared to hot finish seamless products
Truck and Automotive parts
Auto and Truck Axles, Suspension parts and shock absorbers
High Speed Shafts and rollers
Bearings and Spacers, Roll cages, and many other machined tubular parts.
The raw material we use is the most famous brand in China, which has very high density and stability in the quality.Â Our products are hightly appreciated by our clients for their competitive price and good quality.
Wish You a Happy New Year.
If you are interested in our company, please feel free to contact us:
SUZHOU WEIPENG PRECISION MACHINERY CO., LTD
ADD: No.98 Changjiang Road, National Hi-Tech District, 215010, Suzhou, P.R.C
Full-Automatic Busbar MachineÂ ,Bending Machine,Punching Machine,Overhead Crane
JFGJFGJF , http://www.nbbusbartools.com