- Model NO.: SM50-A-1
- Main Application: Diesel Fuel, Fuel Oil
- Sensor: Tube/Flange
- Type: Volume Type Flow Meter
- Measuring Principle: Mechanics
- Certification: CE, UL, ISO
- Trademark: JIASONG
- Specification: SGS
- HS Code: 9026100000
- Accuracy: ±0.2-0.5%
- Size: DN50-100
- Application: Transportation
- Measuring Media: Liquid
- Measurement Object: Closed Pipeline
- Place of Origin: Zhejiang China (Mainland)
- Transport Package: Standard Packing
- Origin: China
Stepless adjusting mechanism allow a micro adjustment of the meter;
Special designed Manifold in line separates from measuring chamber to avoid stress coming from the installation;
Low pressure loss;
Simple construction: Rotor - blades for easy and low maintenance cost;
Wearing compensation: To maintain a good accuracy all along the years;
Meter also for viscous products: Up to 800 Cst.
Materials:
Manifold: Steel or Aluminum;
Body: Nickelic cast iron;
Covers: Steel;
Rotor: Aluminum;
Blades: Carbon;
Bearings: Stainless steel;
Seals/ gaskets: Viton, Buna'N'.
Application:
1. Oil company: Refineries, Oil depots, gas station and Tank trucks distribution;
2. Airports: Aircraft refuellers;
3. Army: Depot reception or loading trucks;
4. Administration (railway companies, public transport);
5. Ports: Boats/barges;
6. Private oil transport companies.
|
Model |
SM50 |
|
Size |
50mm/2 " |
|
Volume Per Revolution |
0.4L/0.08US Gallons |
|
Max. Flow Rate |
24m3/H 400L/min |
|
Min. Flow Rate |
2.4m3/H 40L/min, 10.5US Gallons |
|
Accuracy |
±0.2% |
|
Repeatability |
≤0.05% |
|
Max. Operation Pressure |
8Bar/120PSI/8.3Kg/cm3 |
|
Working Temperature Range |
-40 °C ~+60 °C |
|
Max. Viscosity |
800cps/3850 SSU |
Â
Compared with elbows, bend will have tangent length if the customers need. The bend radius is larger than elbows`. When it is more than 2D, it is called bend. There are 3D, 5D, 7D, 10D bends. Below picture is 3D Bend with tangent length, angle is 45deg and 90deg.
Carbon steel 3D bend
These bends are packed by wooden pallet because of big volume.
As for manufacture standard, it is different from other pipe fittings. Its standard is ASME B16.49.
Materials are carbon, alloy and stainless steel. Wall thickness in common use is STD, XS and so on. With the development of the society, steel bends are widely applied in oil & gas transportation of pipeline system.
Steel Bend
Pipe Bends,Weld Bend,3D Bend,Black Steel Bend
CANGZHOU HENGJIA PIPELINE CO.,LTD , http://www.czhjpipe.com