ETC is an abbreviation of electronic toll collection system for expressways. It is mainly composed of vehicle-mounted electronic tags and roadside units. After the ETC card is processed and the vehicle-mounted electronic tag (OBU) equipment is installed, the vehicle can pass through the ETC lane when the vehicle passes through the highway toll station, and the on-board equipment (OBU and ETC card) and the road within the ETC lane are available. The side unit communicates to complete the toll automatically, so as to realize the freeway tolls when the vehicle is not stopped, and does not need to queue up at the artificial window to collect and receive the card, thereby saving a lot of time.
ETC business is divided into individual business and unit business
personal user:
1. The owner of the vehicle should present the valid original ID card and the original copy of the vehicle's driving permit (if the owner of the vehicle is not required to provide the original ID of the agent's ID card) to the ETC card customer service network or download the relevant application form from the local ETC website: "Jiangsu Connected Expressway ETC The fee-paying business application form and the "e-label use agreement" are paid and fees are paid. After the application is approved, the surveyor will verify the vehicle information and install and activate a full set of vehicle-mounted ETC equipment.
2. For unit users, in addition to the materials required by individual users, the owner's certificate and the original ID card of the handler must be prepared. In addition, the official seal of the unit shall be affixed to the "Application Form for Jiangsu Expressway ETC Toll Collection Business" and the "Electronic Tag Use Agreement." If the letter of introduction and the organization code certificate are carried, there is no need to recap the official seal. Only the signature of the operator is required. You can.
If your vehicle is equipped with an explosion-proof membrane on the front windshield, it must be cut off before installing a piece of space with a size of about 10mm*7mm. Generally, the passenger car will be installed at the windshield behind the rearview mirror. Large and medium passenger cars are installed under the windshield on the side of the driver's seat.
In addition, it should be noted that the speed limit of ETC lanes is 20 km/h. Passengers without ETC cards and OBUs are prohibited from using the ETC lanes. ETC cards and OBUs must be used in conjunction with the vehicles and must be bound to vehicles for exclusive use. In the ETC lane, make sure that the ETC card is inserted in the OBU and shows the balance.
CARBIDE BUTTONS FOR MINING AND CONSTRUCTION
Pdc Core Bit,Pdc Core Drill Bits,Pdc Rock Drill Bit,Pdc Rock Bit
NINGBO LANGSUN TUNGSTEN CARBIDE CO.,LTD. , https://www.lsccarbide.com