When should the brake fluid of the emergency vehicle be replaced?

    The brake fluid of a rescue vehicle should be replaced in a timely manner when the vehicle is used for a certain period of time. Under normal circumstances, after a rescue vehicle has traveled to 20,000 to 10,000 kilometers, it is necessary to conduct a check on the brake fluid of the vehicle. When it is 30,000 to 40000 kilometers or two years, it should be correct. Brake fluid is replaced once. When entering the winter season, if the brake fluid used before can not meet the temperature requirements, it needs to be checked and replaced.

    When you need to replace the brake fluid, you should go to a professional auto shop. Before replacing the brake fluid, care should be taken to ensure that the maintenance personnel do not use alcohol to clean the brake system. Different brands of brake fluid cannot be mixed and brake fluid is required. The system is clean and clean. Prior to replacement, the quality of the brake fluid needs to be discerned by visual identification. The braking of the emergency vehicle is also the most important part of the vehicle, and the brake fluid can play the most crucial role in the job. Therefore, it is necessary to carry out inspections and replacements in a timely manner within a certain period of time.

    1, brake fluid is more important, it should be replaced regularly. If the emergency vehicle is still undergoing oil change and maintenance, it should be replaced along with the brake fluid.

    2, the steering wheel of the emergency vehicle can be replaced without periodical, but the annual inspection of the emergency vehicle and the overhaul, you can find an experienced manager to give you a check, you can adjust the next gap The maintenance time of the vehicle's steering gear can be more than three years.

    3, different brands of brake fluid, different types of brake fluid can not be mixed use. Because the formula of each manufacturer is different, if the brake fluid is used in combination, the performance of the brake fluid will be reduced. For the driver's safety of driving, attention should be paid to the use of brake fluid.

    4. When the brake fluid absorbs impurities and moisture, it should be filtered or replaced in a timely manner. Otherwise, the brake pressure will be insufficient, which directly affects the use of brake fluid. Because the emergency vehicle is not often used, it is also an observation and maintenance.

    5. When the normal mileage of a typical vehicle is 40,000 kilometers or the brake fluid is more than two years old, the brake fluid will deteriorate due to the long-term use. The brake fluid needs to maintain a good seal, it cannot leak in the air for a long time, and it is necessary to check whether the oil lid of the brake fluid has been reliably installed. (Text / Sun Ni)

    PC Hollow Profile Board Extrusion Equipment

    Pc Hollow Profile Board Extrusion Equipment,Pc Hollow Profile Board,Pc Sheet Extrusion Equipment,Pc Hollow Profile Board Production Line

    Zhejiang Jinhai Plastic Machinery Co., Ltd. , https://www.jinhaiextruder.com

    Previous Post: A number of companies raised the price of titanium dioxide
    Next Post: Neiwang, President of the International Fund for Agricultural Development: Strengthening cooperation with China to support precise poverty alleviation
    Home
    Recent Posts
    • · Wanda Baotong more than 10,000 tires were rec…
    • Technical and economic analysis of uranium resou…
    • Mesh belt conveyor introduction
    • Application and difference of talc and calcium c…
    • 2000T/d magnetite ore dressing plant engineering…
    • Mechanism of action of anion collector and non-s…
    • Study on flotation new technology of skarn type …
    • Experimental study and production practice of cy…
    • Research report on ore dressing test of a certai…
    • Chlorine gas selectively leaching strontium sulf…
    • Research on the Method of Maintaining Commonly U…
    • Heavy medium vibration chute
    • Breeding of refractory gold ore pre-oxidized hig…
    • Basic principles of equipment configuration in m…
    • Non-ferrous metal ore mining and mining method
    • SAIC Commercial Vehicle Marketing Business Confe…
    • Brake Pad 3411163307 for BMW
    • Analysis of iron ore beneficiation technology
    • Rare earth process production flow chart
    • Production of molybdenum powder